Samsung SRD-470D User Manual

Also see for SRD-470: User manual Specifications User manual Quick guide

Contents

48_ using the DVRusing the DVRMonitorYou can configure information to be displayed and its format for Spot Out monitor.Setting the MonitorUsing the mouse may help make setup easier.1. Use the up/down buttons ( ) in <Device> window tomove to <Monitor>, and press [ENTER] button.2. Select <Monitor>.3. Use direction buttons ( ◄ ►) to move to a desireditem, and set the value.• Event Display : Sets the dwell time of the event channeldisplay on the monitor when an event occurs.If selected <Continuous>, it displays the channel until youpress [ALARM] button to release it.• Display : Displays only checked items on the monitorscreen.• VGA : The current monitor may not display the video if the <VGA> settings do not match with this player• Sharpness : You can adjust the sharpness of the video output signal.4. When the monitor setup is done, press <OK>.Setting Display positionSome monitors many not display information (camera name, icon, time information, etc.) about the DVR,depending on the condition. Then, you can change the display position of the data.1. In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER]button.2. Select the <Monitor> item.3. Select <Display Position Setup> in the bottom.You will move to the <Display Position Setup> window.4. Use the four direction buttons or the number buttons onthe front panel or the remote control to adjust the dataposition.2011-01-01 01:10:25Display Position SetupOK Cancel30 303030MonitorMonitor Spot Out Event Display OFF Display Date Time CH Name Icon VGA 800x600 Sharpness Level1 (Low)ModeOK CancelDisplay Position Setup