Wireless network (ST200F/ST201F/ST205F only) 103Connecting to a WLAN and configuring network settingsLearn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.Icon DescriptionAd hoc APSecured APWPS APSignal strengthPress [ ] to open AP setting options• When you select a secured AP, a pop-up window appears.Enter the required passwords to connect to the WLAN. Forinformation about entering text, refer to "Entering text". (p. 106)• When a login page appears, refer to "Using the login browser".(p. 104)• When you select an unsecured AP, the camera will connect tothe WLAN.• If you select a WPS profile supported AP, select WPS PIN,and then enter a PIN on the AP device. You can also connectto a WPS profile supported AP by selecting WPS PBC on thecamera, and then selecting WPS button on the AP device.Connecting to a WLAN1 On the Home screen, scroll to .2 Select , , , , or .3 Press [ ], and then select Wi-Fi Setting.• In some modes, press [ ] or follow the on-screeninstructions until the Wi-Fi Setting screen appears.• The camera automatically searches for available AP devices.4 Select an AP.Wi-Fi SettingSamsung 2Samsung 1Samsung 3Samsung 4Samsung 5Back Select• Select WPS PBC to connect WPS AP.• Select Refresh to refresh connectable APs.• Select Add wireless network to add an AP manually.