Playback/Editing 96Transferring files to your Windows computer6 Turn on the camera.• When the Intelli-studio installation pop-up appears on thecomputer screen, follow the on-screen instructions tocomplete the installation.• Once the Intelli-studio is installed on your computer, thecomputer recognizes the camera and launches theIntelli-studio automatically.If you set the USB option to Select Mode, select Computer in thepop-up window.7 Select a destination folder on your computer, and thenselect Yes.• New files stored on the camera will automatically transfer tothe selected folder.• If your camera has no new files, the pop-up window for savingnew files will not appear.For Windows Vista and Windows 7, select Run iLinker.exe from theAuto Play window to start Intelli-studio. If Run iLinker.exe does not appearon the computer, click → Computer → Intelli-studio, and then followthe on-screen instructions to complete the Intelli-studio installation.Transferring files with Intelli-studioYou can download Intelli-studio from the linked webpage andinstall it on your computer. When you connect the camera toa computer with Intelli-studio installed, the program will launchautomatically.The battery will charge while the camera is connected to a computer withthe USB cable.1 On the Home screen, scroll to .2 Select .3 Select Connectivity → PC Software → On.4 Turn off the camera.5 Connect the camera to your computer with the USBcable.You must plug the small end of the USB cable into your camera. If thecable is reversed, it may damage your files. The manufacturer is notresponsible for any loss of data.