Samsung ST70 User Manual

Also see for ST70: User manual Service manual Quick start manual Quick start manual Quick start manual

Contents

41Exposure compensationThis camera automatically adjusts the exposure according to theambient lighting conditions. You can also select the exposure valueby using the [EV] menu. Compensating Exposure1. Click the Up/Down button from theShooting menu to select [EV] ( ).2. Use the Left and Right buttons to setthe desired exposure compensationfactor.3. Press the OK button. The value youset will be saved and the Exposure Compensation setup modewill be closed. If you change the exposure value, the exposureindicator ( ) will be displayed on the Left of the LCD monitor.Ä A negative exposure compensation value reduces the exposure.Note that a positive exposure compensation value increases theexposure and the LCD monitor will appear white or you may notget good pictures.EVBack MoveISO[Auto] : The camera's sensitivity isautomatically changed byvariables such as lighting valueor subject brightness.[ISO 80, 100, 200, 400, 800, 1600, 3200] :You can increase the shutter speed whilethe same amount of light is present, by increasing the ISO sensitivity.However, the image may be saturated in high luminance. The higherthe ISO value, the higher the camera’s sensitivity to light and thereforethe greater its capacity to take pictures in dark conditions. However,the noise level in the image will increase as the ISO value increases,making the image appear coarse.Ä When [Motion Capture] is set, ISO speed will be set to Auto.Ä [ISO] is enabled only in [Program] mode.You can select the ISO sensitivity when taking pictures.The speed orspecific light-sensitivity of a camera is rated by ISO numbers.ISOBack MoveShooting ( )