Samsung ST70 User Manual

Also see for ST70: User manual Service manual Quick start manual Quick start manual Quick start manual

Contents

81Images can be displayed continuously at pre-set intervals.You can view the Multi Slide Show by connecting the camera to anexternal monitor.1. Press the play mode button and press the MENU button.2. Press the Up / Down button and select the [Multi Slide Show]menu tab and press the OK button.Start the Multi Slide ShowThe Multi Slide Show can start only in the [Start] menu.1. Use the Up / Down button to select the [Start] menu and pressthe Right button.2. Select a desired sub menu by pressingthe Up / Down button.[Play] : The Multi Slide Show isclosed after one cycle.[Repeat] : The Slide show is repeateduntil cancelled.3. Press the OK button and the slide show will be started.- To pause the slide show while playing it back, press the OKbutton again.- Pressing the OK button again will cause the Multi Slide Showrestart.- To stop playback of the Multi Slide Show, press the OK button,and then press the Left or Right button.Back SetImages :AllInterval :1 secMusic :OffEffect :OffStart PlayRepeatYou can select image to view1. Use the Up / Down button to select the[Images] menu and press the Rightbutton.2. Select a desired sub menu by pressingthe Up / Down button.[All] : All images saved on theMemory are played back. Press the OK button tosave the configuration.[Date] : Images taken in a specified date are played back.Press the OK button to save the configuration.[Select] : Play only the selected images. The selected imagecan be saved as [Select1], [Select2] and [Select3].If you save the selected image with the [New Select]command, it will be saved as [Select1]. But when anew image is saved again using [New Select], theformer image which had been saved as [Select1] willbe saved as [Select2] automatically.You can changeand cancel the images which were saved as [Select1],[Select2] and [Select3]. Press the Fn button to savethe configuration.3. Select [Play] or [Repeat] in the [Start] menu to start the multislide show.Selecting ImagesBack SetImages :AllInterval :1 secMusic :OffEffect :OffStartAllDateSelectStarting the Multi Slide Show ( )