Playback/Editing 101Transferring files to your Windows computer5 Turn on the camera.• The computer recognizes the camera automatically and Intelli-studio launches automatically.If you set the USB option to Select Mode, select Computer in thepop-up window.6 Select a destination folder on your computer, and thenselect Yes.• New files stored on the camera will automatically transfer tothe selected folder.• If your camera has no new files, the pop-up window for savingnew files will not appear.For Windows Vista and Windows 7, select Run iStudio.exe from the AutoPlay window to start Intelli-studio.Transferring files with Intelli-studioIntelli-studio will start automatically when you connect the camerato your computer with the USB cable.The battery will charge while the camera is connected to a computer with theUSB cable.1 On the Home screen, touch .2 Touch Connectivity, and then turn on PC Software bytouching the setting button.3 Turn off the camera.4 Connect the camera to your computer with the USBcable.You must plug the end of the cable with the indicator light (S) intoyour camera. If the cable is reversed, it may damage your files. Themanufacturer is not responsible for any loss of data.
