7Basic troubleshootingLearn to solve common problems by setting shooting options.The subject’s eyesappear red.Red eye is caused by the reflection of light from the camera flash off the back of the eye.• Set the flash option to Red-eye or Red-eye Fix. (p. 59)• If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 97)Photos have dustspots.If dust particles are present in the air, you may capture them in photos when you use the flash.• Turn off the flash or avoid capturing photos in a dusty place.• Set ISO sensitivity options. (p. 61)Photos are blurred. Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.• Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 30)• Use the DUAL IS mode. (p. 39)Photos are blurredwhen shooting atnight.As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold thecamera steady enough to take a clear picture and may result in camera shake.• Select Night Shot mode. (p. 37)• Turn on the flash. (p. 59)• Set ISO sensitivity options. (p. 61)• Use a tripod to prevent your camera from shaking.Subjects come outtoo dark because ofbacklighting.When the light source is behind the subject or when there is a high contrast between the light and darkareas, the subject may appear too dark.• Avoid shooting toward the sun.• Select Backlight in Scene mode. (p. 36)• Set the flash option to Fill in. (p. 59)• Adjust the exposure. (p. 69)• Set the metering option to Spot if a bright subject is in the center of the frame. (p. 70)
