Samsung SU4341 User Manual

Contents

6BAREFLOORHIGHCARPET2-7BAREFLOORHIGHCARPET2-8Cleaning lightweightflexible rugsStand on one end of rug and movecleaner toward other end or edge.before reaching edge, push down onhandle. This will lift up thenozzle(front of cleaner)and willprevent rug from clinging to cleaner.Continue to lift front of cleaner so thatwhen you have reached the edge, it iscompletely off the rug. Move cleanerback to start again, lower front ofcleaner, and use only forward strokes.2-6A. Combination tool:Two types of cleaning tools areincluded in one attachment: rotate fordesired tool.· Use brush side to dust furniture,blinds, books, lamps, shelves.· Use upholstery side for curtains,draperies, cushions, fabrics.B. Crevice tool:Use in corners, on stairs, baseboards,and behind furniture.C. Extension Wand:Use with desired attachments andnarrow wand for a longer reach.D. Mini Turbo Brush :Use rotating brush action for smallareas such as stairs and upholstery.Note: Press gently when using MiniTurbo Brush to gain maximumcleaning. Too much pressure couldcause the brush to stop rotating.✽ optionE. Wooden Floor Brush (Select Models):Use for bare floors. Swivel head turns to getinto tight spaces and fits under cabinets.Note: The Wooden Floor Brush doesnot store on board.Carrying handleThe cleaner can also be movedby using the carrying handle.2-4Cleaning Tool attachmentsAttachment tools can be used toclean furniture or drapes, on stairsor in corners.When using the attachments,ensure the vacuum cleaner isplaced firmly on the floor with thehandle in the upright position.do not place the vacuum on top offurniture or steps as thebrushroller may cause damage.2-5 ABDC✽ optionEOperationHeight adjustment1. Place handle in upright position2. Turn height adjustment dial(A) to desired setting.bare Floor : For no-carpeted, bare floors.low Setting : For short pile carpets.Medium Setting : For short and medium pile carpets.highest Setting : For plush pile carpet.Note : For optimal cleaning performance, adjust to the lowest practicalsetting.If your cleaner is difficult to push, adjust to the next higher setting.Always ensure that the correct height setting is used for yourflooring type as damage may occur if the height setting is notchanged to reflect your flooring type.