Samsung SV-DVD3E Instruction Manual

Also see for SV-DVD3E: Instruction manual Instruction manual Service manual Service manual

Contents

GBPresetting the Stations Manually21☛ You do not need to preset the stations manually if youhave already set them automatically.1 Press the SETUP button on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding ",❷ or ➛, ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the corresponding " or ❷ buttons, until the MANUAL SETUP option is selected.5 Press the ENTER button to select a MANUAL SET UP option.Result: The TV STATION TABLE menu is displayed.6 Press the " or ❷ buttons to select a programme number asrequired.7 Press the ❿ button to preset the station.Result: The MANUAL TUNING menu is displayed.8 Press the ➛ or ❿ buttons to start scanning.Result: The frequency band is scanned and the first stationfound is displayed.9 Press the ❷ button, until the DECODER is selected.10 Press the ❿ button to activate or deactivate use of the decoderfor the TV station, if necessary.11 Press the " or ❷ buttons until the NAME is selected.The station name is set automatically from the broadcast signal.12 To change the programme’s name, press the ❿!button.Result: The first letter of the name flashes.13 To... Then...Select a character Press the " or ❷ button until thein the name required character is displayed(letters, numbers or “-” character).Move to the next or Press the ❿ or ➛ buttonsprevious character respectively.14 If you... Then...Wish to store the Press the " or ❷!buttons until the MFTstation displayed is selected. Press the ➛ or ❿ buttons to adjust thepicture, if necessary. Press ENTER to store the stationDo not wish to Press the " or ❷ buttons until the CHstore the station is selected.displayed Press the ➛ or ❿ buttons to go onscanning the frequency band and displaythe next station Go back to the beginning of Step 1415 Repeat this procedure from Step 6 onwards, until all the requiredstations have been stored.16 On completion, press the RETURN button three times to exit themenu.GB20Presetting the Stations Automatically☛ You do not need to preset the stations if you have alreadyset them automatically (see Plug & Auto Set Up on page 13).Your DVD-VCR contains a built-in tuner used to receive televisionbroadcasts.You must preset the stations received through the tuner. This canbe done: Plug & Auto Set up (see page 13) Automatically Manually (see page 21)You can store up to 80 stations.1 Press the SETUP button on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding ",❷ or ➛, ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the corresponding " or ❷ buttons, until the AUTO SET UPoption is selected. And then press the ENTER button to select thisoption.Result: The country selection MENU is displayed.5 Press the " or ❷ buttons to select your country.☛ The VCR searches for the stations according to a presetpreference list corresponding to the country that you haveselected.6 Press ENTER button.Result: A message appears, indicating that any channelsalready preset on your VCR will be deleted.7 Press ENTER to start the auto scanning.Result: The PLEASE WAIT indication flashes on thetelevision screen. The first frequency band is scanned and the firststation found is displayed and stored. The DVD-VCR then searches for the second stationand so on. When the automatic scanning procedure hasfinished, the DVD-VCR switches automatically toprogramme 1.➢ The number of stations automatically stored by the DVD-VCR depends on the number of stations that it has found.8 If you wish to cancel the auto scanning before the end, press theRETURN button three times to exit the menu.➢ The time and date are set automatically from thebroadcast signal. If the signal is weak or ghostingoccurs, the time and date may not be set automati-cally. In this case, they should be set manually (seepage 18). Once the auto scanning procedure has finished, somestations may have been stored more than once; selectthe stations with the best reception and delete theones no longer required (see page 35).COUNTRY SELECTIONA I TRB N GRDK P HUFIN E PLD S CZNL CH OTHERSRETURN "❷!!➛!!!❿ ENTERAUTO SET UPPLEASE WAIT2%I--------------------IRETURNYOUR DATA WILL BE LOSTPRESS ENTER TO CONTINUERETURN TO EXITINSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN "❷!!!!ENTERMAIN MENUINSTALLATIONRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageInstallREC DISC MENUSETUP/ENTERRETURN TITLE SUBTITLE MARK22122INSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN "❷!!!!ENTERTV STATION TABLEPR CH NAME DEC12345"❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SWAPPING:ENTERRETURN DELETE:CLEARMANUAL TUNINGPR :CH : ---MFT : -DECODER : OFFNAME : ----"❷!!!➛ ❿!!! MEMORY:ENTERRETURNMAIN MENUINSTALLATIONRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageInstallVCR VCR