Samsung SWA-4000 Instruction Manual

Also see for SWA-4000: Service manual

ENG17CONNECTIONSPress STOP button.• When disc is played back, press the STOP button twice so that “STOP”, appears on the display.Press and hold P.SCAN button on the remote control for over 5 seconds.• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"alternately.• When you select P.SCAN, "P.SCAN" will appear on the display.• To set P.Scan mode for DivX discs, press the P.SCAN button on the remote control for more than5 seconds with no disc in the unit (“'NO DISC" on the display), then load the DivX disc and play.In interlaced-scan video, a frame consists of two inter-laced fields (odd and even), where each field containsevery other horizontal line in the frame.The odd field of alternating lines is displayed first, andthen the even field is displayed to fill in the alternatinggaps left by the odd field to form a single frame.One frame, displayed every 1/30th of a second, containstwo interfaced fields, thus a total of 60 fields are dis-played every 1/60th of a second.The interlaced scanning method is intended for capturinga still object.Interlaced Scan (1 FRAME = 2 FIELDS)The progressive scanning method scans one full frame ofvideo consecutively down the screen, line by line.An entire image is drawn at one time, as opposed to theinterlaced scanning process by which a video image isdrawn in a series of passes.The progressive scanning method is desirable for dealingwith moving objects.Progressive Scan (FULL FRAME)What is Progressive (or Non-Interlaced) Scanning?• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that supportProgressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressivescan TVs.)• Depending on the brand and model of your TV, this function may not work.Note1812Choose one of the three methods for connecting to a TV.Connecting the Video Out to TV Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entirepicture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all linesdisplayed in one pass) to create a clear and detailed picture without visible scan lines.P.SCAN (Progressive Scan) FunctionHT-WP38TV- Connect the supplied video cable from the VIDEO OUT jack on the back panel of the systemto the VIDEO IN jack on your TV.Composite Video ....... (Good Quality)• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed anysignal.NoteMETHOD 2 METHOD 3GreenGreenBlueBlueRedRed(supplied)METHOD 1METHOD 1- If your television is equipped with an S-Video input, connect an S-Video cable (not supplied) fromthe S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television.S-Video ....... (Better Quality)METHOD 2- If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the correspondingjacks on your TV.Component ....... (Best Quality)METHOD 3