Samsung SWA-4000 Instruction Manual

Also see for SWA-4000: Service manual

ENG2423OPERATIONTo stop playback, press STOP during playback.• If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.(This function works only with DVDs.)• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from thebeginning.To temporarily pause playback, press PLAY/PAUSE during playback.• To resume playback, press PLAY/PAUSE ( ) button again.Disc Playback The DVD/CD function is automatically selected when Disc Skip is pushed.Selecting a Disc in the Disc changer2 Load a disc.• Place a disc gently into the tray with the disc’s labelfacing up.• Depending on the content of the disc, the initial screen may appear different.• Depending on the recording mode, some MP3-CDs cannot be played.• Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.1 Press OPEN/CLOSE button to open thedisc tray.3 Press DISC SKIP button.• Rotate the carousel tray so you can load the third, fourth,and fifth discs.4 Close the compartment by pressing theOPEN/CLOSE button again.DVD CD• Playback starts automatically.NoteTo select a specific disc, press the corresponding DIRECT PLAY(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on theremote control, until the required disc indicator flashes.• If the disc selected is not loaded, the next disc is played automatically.