Samsung SWA-9500S User Manual

Also see for SWA-9500S: User manual User manual User manual

English - 401 CHECKING THECOMPONENTSSurround Speaker X 2 (Left / Right) / Power Cord X 2NOTES• For more information about the power supply and powerconsumption, refer to the label attached to the product.(Label: Rear of the Main Unit)• Design and specifications are subject to change without priornotice.02 CONNECTING THESWA-9500S TO ASOUNDBAR1. Check the standby status after plugging intoan electrical outletPlug the Surround Speakers power cord into an electrical outletand into the Surround Speakers to turn on the Surround Speakers.The LINK LED indicator (blue LED) on the Surround Speakers blinks.If the LED does not blink, refer to step 5.Bottoms of the Left and Right SurroundSpeakersBlinking blue fastRear of the Left and RightSurround Speakers2. Turn off the SoundbarTurn off the Soundbar using the Soundbar’s remote control or bypressing the (Power) button on the main Soundbar unit.BYE• The image of the Soundbar may differ from your Soundbar,depending on the model.3. Configure “ID SET” using the Soundbar’sremote controlPress the Up button on the Soundbar remote control for 5 seconds.• The ID SET message appears on the Soundbar main unit’s displayfor a short time and then disappears.• After the ID SET process, the Soundbar power is automaticallyturned on.SOUNDMODEPAIR5 SecID SET• The image of the Soundbar may differ from your Soundbar,depending on the model.4. Check if the LINK LED is solid blue(connection complete)Stops blinking.Glows blue.Rear of the Leftand Right SurroundSpeakersThe LINK LED indicatorstops blinking and glowsa solid blue when aconnection is establishedbetween the Soundbarand the SurroundSpeakers.5.LL••SS•C•R•