Samsung SWA-9500S User Manual

Also see for SWA-9500S: User manual User manual User manual

English - 5Englishyds.layd5. If the SWA-9500S does not connect, takethe necessary steps according to the LEDIndicator’s statusLINK (Blue) On : Successfully connected (normal operation).LINK (Blue) Blinking : Recovering the connection.• Check if the power cable attached to the main Soundbar unitis connected properly or wait about 5 minutes.• Repeat steps 2 through 4.STANDBY (Red) On :Standby (with the Soundbar main unit turned off).• Check if the power cable attached to the main Soundbar unitis connected properly.Connection failed.• 1. Press the ID SET button on the back of the SurroundSpeakers with a pen tip for 5~6 seconds until the LINK LEDindicator blinks (in Blue).5 Sec2. Repeat steps 2 through 4.Red and blue Blinking : Malfunction• See the contact information for the Samsung Service Centrein this manual.Installing the Surround Speakers on aWall (Optional)You can purchase wall mounts separately to install the surroundspeakers on a wall.Wall mounts aren’t sold by Samsung.Notes for Wall Mounting the Surround Speakers• Surround Speaker wall mounts must be able to support morethan 8.0 kg.• Hole size : 1/4 - 20 UNC threaded insertRear of the Left and Right Surround Speakers– Standard Screw : 6.3 mm , 1.3 mm Pitch– Length : 18.0 mm long– Quantity : Left 1 EA / Right 1 EA• Check the strength of the wall before you install the Wall MountBrackets. If the strength is insufficient, make sure to reinforcethe wall before installing the Wall Mount Brackets and thespeakers on the wall.• Samsung is not liable for any damage to the product due to theproduct being installed inappropriately.• Take care not to install the speakers sideways or upside down.03 COMPATIBLE MODELS• Compatible with select Samsung Soundbar. Please visit theSoundbar product page at www.samsung.com/support for moreinformation.• Compatible model list is subject to change without further notice.04 OPEN SOURCE LICENCENOTICETo send inquiries and requests for questions regarding opensources, contact Samsung Open Source (http://opensource.samsung.com)