English - Setting the Channel ModeYou can display either the added channels list or the favourite channels list when the CH LIST button on the remote controlis pressed.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Channel”, then press the ENTERbutton.2. Press the ▲ or ▼ button to select “Channel Mode”, then press the ENTERbutton.3. Press the ▲ or ▼ button to select “Added Ch.” or “Favourite Ch.”.Press the ENTER button.4. Press the EXIT button to exit.Fine Tuning Analogue Channels1. Use the number buttons to directly select the channel that you want to finetune.2. Press the MENU button to display the menu. Press the ▲ or ▼ button toselect “Channel”, then press the ENTER button.3. Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTERbutton.4. Press the ◄ or ► button to adjust the fine tuning. Press the ENTERbutton.5. Press the EXIT button to exit.Fine tuned channels that have been saved are marked with an asterisk “*”on the right-hand side of the channel number in the channel banner.To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button andthen press the ENTER button.Only Analogue TV channels can be fine tuned.➣➣➣ChannelDefault Guide : Mini GuideChannel ListChannel Mode : Added Ch. ►Fine TuneSignal InformationLNA : OffChannelDefault Guide : Mini GuideChannel ListChannel Mode : Added Ch.►Fine TuneSignal InformationLNA : OffAdded Ch.Favourite Ch.ChannelChannel ListChannel Mode : Added Ch.Fine Tune ►Signal InformationLNA : OffFine TuneATV 6 * Fine TunedResetReturnSaveMove Adjust+ 3