English - Checking the Digital-Signal InformationYou can get information about the signal status.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Channel”, then press the ENTERbutton.2. Press the ▲ or ▼ button to select “Signal Information”, then press theENTER button.3. Press the EXIT button to exit.If the signal status is poor, the “No signal.” message is displayed.While viewing a Digital channel, this function can be selected.➣➣LNA (Low Noise Amplifier)If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts theincoming signal).1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Channel”, then press the ENTERbutton.2. Press the ▲ or ▼ button to select “LNA”, then press the ENTER button.3. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button.4. Press the EXIT button to exit.While viewing an Analogue channel, this function can be selected.➣ChannelChannel Mode : Added Ch.Fine TuneSignal Information ►LNA : OffSignal InformationFrequency : 482000 KHzService ID : 0401Multiplex : (TSID 0004, ONID 20fa)Network : (ID 20fa)Bit error level 0Signal Strength 88ReturnEnterOKChannelFine TuneSignal InformationLNA : On ►OffOnChannelFine TuneSignal InformationLNA : Off ►
