Samsung Series 850 User Manual

Also see for 850 series: User manual Quick setup guide User manual Quick start guide

Contents

Film ModeYou can optimize the picture mode for watching movies.Off: Turn the Film Mode function off.Auto1 : Automatically adjusts the picture for the best quality when watching a lm.Auto2 : Automatically optimizes the video text when watching a lm.Cinema Smooth: Offers the ultimate cinema experience. (PN50B860Y2F / PN58B860Y2F only)Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).An 1080p 24Hz HDMI signal must be input to use the Cinema Smooth function.Blue Only Mode Off / OnThis function is for AV device measurement experts. This function displays the blue signalonly by removing the red and green signals from the video signal so as to provide a BlueFilter effect that is used to adjust the Color and Tint of video equipment such as DVDplayers, Home Theaters, etc.Blue Only Mode is available when the picture mode is set to Movie or Standard.Screen Burn ProtectionCongures the Screen Burn Protection options to prevent and reduce pixel burn.When an image remains in one position too long, it may cause a permanent burn on thescreen.Preventing Screen Burn-inTo reduce the possibility of screen burn, this unit is equipped with screen burn preventiontechnology. This technology enables you to set picture movement up/down (Vertical Line)and side to side (Horizontal Dot).The Time setting allows you to program the time between movement of the picture inminutes.Pixel Shift : Shifts the picture to prevent and reduce pixel burn.Optimum condition for pixel shift;Item TV/AV/Component/HDMI/PCHorizontal 0~2 2Vertical 0~4 4Time(min) 1~4min. 2 min.The Pixel Shift value may differ depending on the monitor size (inches) and mode.Side Gray : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the whitebalance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.Light: When you set the screen ratio to 4:3, it brightens the left and right sides.Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.To remove after-images on the screen, use the Scrolling function.Press any key on the remote control to cancel this feature.Reducing the Effects of Screen BurnIf screen burn has occurred, you can select Scrolling to help remove screen burn artifacts.Scrolling : This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Usethis function when there are remaining after-images or symbols on the screen, especially when you displayed a still image onthe screen for a long time (approximately 1 hour).The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove afterimageson the screen. If the after-image is not removed after performing the function, repeat the function again.Picture Reset Reset Picture Mode / CancelResets all picture settings to the default values.Select a picture mode to be reset. The reset is performed for each picture mode.••••NNN•NN•--NN•NRNAdvanced SettingsPicture OptionsPicture Reset PictureEnglish - 27Screen Burn ProtectionPixel Shift ScrollingSide Gray : LightU Move E Enter R ReturnPicture OptionsSize : 16:9Digital NR : AutoHDMI Black Level : Normal1080 Full HD Motion Demo : OffFilm Mode : OffBlue Only Mode : Off Screen Burn ProtectionU Move E Enter R Return