Samsung Series 850 User Manual

Also see for 850 series: User manual Quick setup guide User manual Quick start guide

Contents

English - 60Setting Up Anynet+Anynet+ enables you to control all connected Samsung devices that supportAnynet+ with your Samsung TV’s remote.Setting Up Anynet+The following settings help set the Anynet+ functions.Press the TOOLS button to display Tools menu.You can also display Anynet+ menu by selecting Tools Anynet +(HDMI-CEC).TAnynet +(HDMI-CEC) Off / OnTo use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ relatedoperations are deactivated.Auto Turn Off No / YesIf you set Auto Turn Off to Yes, connected external devices are also turned off whenthe TV is turned off.If an external device is still recording, it may or may not turn off.RNNSwitching between Anynet+ Devices1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).2. Press the or button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed. If you cannot nd a device youwant, press the red button to scan for devices.Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device Listmenu appears.3. Press the or button to select to a particular device and press the ENTEREbutton. It is switched to the selected device.Switching to the selected devices may take up to 2 minutes.The time required to scan for devices is determined by the number of connected devices.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TVmay not always be automatically displayed in the device list. Press the red button to search for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet + device by using the TOOLS button.Anynet + MenuThe Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.Anynet + Menu DescriptionView TV Anynet + mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of theDVD recorder will appear.(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menuof the DVD recorder will appear.Recording: (*recorder) Starts recording immediately. (This menu works only for a device supporting recording.)Reserve Recording Enables reserving a recording for the recorder.Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.Setup Sets up the Anynet+ (HDMI-CEC) function.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, itwill be represented as (*device_name).NNNNNNRNContinued...ApplicationMedia Play (USB & DLNA)Anynet+ (HDMI-CEC) Content LibraryInternet@TVHome Network CentreU Move E Enter R ReturnAnynet+(HDMI-CEC) : On #Auto Turn Off : YesU Move E Enter R ReturnView TVDevice ListRecording : DVDRDVDR MENUDVDR INFOReceiver : OnSetup