Samsung Series 9 9000 UN55C9000 User Manual

Also see for UN46C9000 Series: Available Apps User manual User manual Brochure User manual

Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.View TV Changes Anynet+ mode to TV broadcast mode.Device List Shows the Anynet+ device list.(devicename) MENU Shows the connected device menus. E,g. If a DVD recorder is connected, the disc menu ofthe DVD recorder will appear,(devicename) INFO Shows the play menu of the connected device. E,g. If a DVD recorder is connected, theplay menu of the DVD recorder will appear.Recording: (*recorder) Starts recording immediately using the recorder, (This is only available for devices thatsupport the recording function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*devicename),Setting Up Anynet+(_ MENU _ Application --_Anynet+ (HDMm-CEC) _ ENTERI_Ill SetupAnynet+ (HDMm-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMm-CEC) must be set to On.When the Anynet+ (HDMm-CEC) function is disabled, all the Anynet+ related operations are deactivated.Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.The active source on the TV must be set to TV to use the Anynet+ function.Even if an external device is still recording, it may turn off.!1.2,Switching between Anynet+ DevicesAnynet+ devices connected to the TV are listed.If you cannot find a device you want, press the Red button to refresh the list.Select a device and press the ENTERI_ button, You can switch to the selected device,The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.* Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switchingoperation.* If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.Make sure to switch to an Anynet+ device by using the Device List,English 47