Samsung Series6 650 PN50A650 User Manual

Also see for PN50A650T1F: Manual User manual Safety instructions Quick setup guide Quick setup guide

Contents

Setting Up Anynet +The following settings help set the Anynet + functions.To use the An net+ Function, An net+ HDMI-CEC must be set to On1 Press the MENU button. Press the A or T button to select Application, thenpress the ENTER button.2 Press the A, or T button to select Anynet+ (HDMI-OEC), then press theENTER button.Press the A or T button to select On, then press the ENTER button.The Anynet+ (HDMI-CEC) function is enabled.if you select Off, Anynet+ (HDMI-CEC) is disabled.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet + relatedoperations are deactivated.Settin arian n_turnOffAutomaticall when the TV is Turned Off2 Press the A or T button to select Auto Turn Off, then press the ENTER button.3 Press the _, or T button to select Yes, then press the ENTER button.The Auto Turn Off function is enabled.if you setect No, the Aute Turn Off function is canceled.Press the EXIT button to exit.The active source on the TV remote must be set to TV to use the Anynet + function.If you set Auto Turn Off to Yes, connected externat devices are also turned off when the TV is turned off.If an externa! device is still recording, it may or may not turn off.Scanning and Switching between Anynet + DevicesPress the TOOLS button._,_ Anynet + devices connected to the TV are listed.if you cannot find a device you want, press the red button to scan fordevices.Press the _, or T button to select a particular device and press the ENTERbutton. It is switched to the selected device.Only when you set Anynet+ (HDMI-CEC) to On in the Application menu,the Device List menu appears.If you cannot find a device you want, press the ,& or T button to selectSearching Connections, then press the ENTER button.The message Configuring Anynet + connection.., is displayed.When searching devices complete, the connected devices are listed in theAnynet+ menu.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switchingoperation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically scans devices when it is turned on using the POWER button, devices connected whenthe TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to searchdevices.If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet + function. Makesure to switch to an external Anynet + device by using the TOOLS button.Continued...I BN68 01532A Engindb 102 2008 04 18 2_ 8:39119