Samsung Series6 650 PN50A650 User Manual

Also see for PN50A650T1F: Manual User manual Safety instructions Quick setup guide Quick setup guide

Contents

i Network Settings and InfoLink iTo access Samsung's Infolink network feature, you must make one of the connections on the following pages.Network Connection =CableLAN Connection for a DHCP EnvironmentThe procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IPaddress, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter themmanually.The Modem Porton the Wall1 _:xternal Modem(ADSL/VDSLICable TV)Modem Cab eTV Rear Panel t Connect the [LAN] porton the rear panel of theTV and the externalmodem with a LANCable.2 Connect the Modemport on the wall and theexternal modem with aModem Cable.You can connect the LAN via a Sharer (Router).IP SharerExternat ModemTV Rear PanelThe Modem Porton the Wail(ADSLIVDSL/Cable TV) Modem CableYou can connect the LAN port and the TV directly depending on your network status.TV Rear PanelThe LAN Porton the WailLAN Cable> The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10seconds and then try again.> For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the correspondingproduct.> You can connect the TV to the LAN directly without connecting it through a Sharer (Router)> You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-connection-type ADSL modem.I BN68 01532A Engindb 89 2008 04 18 2_ 8:38157