Inserting Batteries into Samsung Smart Control" Availability depends on the specific model and area.To use Samsung Smart Control, first refer to the figure below and insert batteries into the unit.11 Gently pull on the battery cover's notch and then remove the cover completely once it comesloose.21 Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.31 Place the battery cover on the remote control and insert the top part of the cover into the remotecontrol.41 Press the catches on both sides of the battery cover in the order shown so that the cover iscompletely attached to the remote control.When you see this alarm icon on the screen...Following alarm icon indicates Samsung Smart Control's batteries are low. If the alarm icon pops up,replace the batteries. Samsung recommends using alkaline batteries for a longer operating life.
