Connecting to a Wired Internet Network AutomaticallyNetwork > Network Settings Try NowAutomatically connect to an available network.11 Set the Network Type to Wired, and then select Connect.21 The TV attempts to connect to an available network. Once successful, you will see a confirmationmessage. Select OK. If the attempt fails, try again, or connect manually.Connecting to a Wired Internet Network ManuallyNetwork > Network SettingsWith networks that require a static IP address, you will need to enter the IP address, subnet mask,gateway, and DNS values manually to connect to the network. To get these values, contact yourInternet Service Provider (ISP)." Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IPaddresses.11 Set the Network Type to Wired, and then select Connect.Network SettingsSelect your network type.Network Type WiredConnectYou can connect your TVto the internet.
