Connecting to a TV Viewing Card slotTo connect the CI CARD, follow these steps:2 CI card slot is available depending on the model.Using the “CI or CI+ CARD”To watch paid channels, the “CI or CI+ CARD” must be inserted." Turn the TV off to connect or disconnect a CI card.● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “ScrambledSignal”.● The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID andother information will be displayed in about 2~3 minutes. If an error message is displayed, pleasecontact your service provider.● When the configuration of channel information has finished, the message “Updating Completed”is displayed, indicating the channel list is updated." You must obtain a “CI or CI+ CARD” from a local cable service provider." When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI orCI+ CARD” may cause damage to it." Insert the “CI or CI+ CARD” in the direction marked on the card." The location of the COMMON INTERFACE slot may be different depending on the model." “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer." If you have any problems, please contact a service provider." Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted orwill not be seen.
