Installing the Product 2-42-4 Attaching a Wall Mount/Desktop StandAttaching a Wall Mount/Desktop Stand(not supplied)This product provides a stand mount of 75 mm x 75 mm (2.95 x 2.95 inches) that complies with the VESA specifications.1. Turn the product off and unplug the power cord from the wall outlet.2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.3. Remove the screw from the stand and separate the stand.4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,wall mount stand or another stand) and firmly fix the stand by fastening the screw.•If you use screws that are longer than the standard specifications, the inside of the product may be damaged.•For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differdepending on the corresponding specifications.•Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them usingexcessive force.This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for anydamage or injury.•Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatiblewith the specifications or due to an installation not performed by an authorized installation engineer.•When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of spacefrom the wall.•Use the wall mount according to the international specifications.A.Wall/Desktop Stand MountB.Wall mount kit/desktop stand (not supplied)