1-3 Major Safety PrecautionsCautionInstallation RelatedWarningAvoid unplugging the power plug while theproduct is operating.• Otherwise, it may damage the productdue to electric shock.Make sure to use only the power cord sup-plied by our company. In addition, do not usethe power cord of another electric appliance.• Otherwise, it may result in electric shockor fire.When unplugging the power plug from thewall outlet, make sure to hold it by the plugand not by the cord.• Otherwise, it may result in electric shockor fire.Connect the power plug to a wall outlet thatcan be easily reached.• When a problem occurs with the product,you must unplug the power plug to cutthe power off completely. You cannot cutthe power off completely using only thepower button on the product.Avoid placing burning candles, mosquito-repellentor cigarettes on the product.• Otherwise, it may result in fire.Ask an installation engineer or relevantcompany to install the product onto the wall.• Otherwise, it may result in injury.• Make sure to use the specified wallmount.Avoid installing the product in a badly-venti-lated location such as inside a bookshelf orcloset.• Otherwise, it may result in fire due tointernal over-heating.Keep a distance of at least 10 cm(3.93inches) from the wall when installing theproduct for ventilation.• Otherwise, it may result in fire due tointernal over-heating.Keep the plastic bags used to pack theproduct away from children.• If children place the plastic bags overtheir heads, they may suffocate.Avoid installing the product in a location thatis unstable or exposed to excessive vibra-tion such as on an unstable or slanted shelf.• The product may fall and this may resultin damage to the product or injury.• If you use the product in a locationexposed to excessive vibrations, it mayresult in a problem with the product orfire.Avoid installing the product in a locationexposed to dust, moisture (sauna), oil,smoke or water (rain drops) and installing itwithin a vehicle.• This may result in electric shock or fire.Avoid installing the product in a locationexposed to direct sunlight and installing theproduct near a heat source such as a fire-place or heater.• This may shorten the product life cycleor cause fire.