AutoAutomatically download the correct time from a digital channel. To enable this option, an antennacable has to be connected to the TV. The accuracy of the time information received may varydepending on the channel and signal. Set Clock Mode to Auto." Time Zone and DST may not be supported depending on the country.● DST: Set the DST (Daylight Savings Time).● Time Zone: Choose your time zone.Time OffsetScreen Menu > System > Time > Clock > Time Offset Try NowIf the set time is not accurate, users can set the time offset to adjust the time difference hourly from-12 to +12 hour. Changing Time Offset is only available, when the Time is set to auto, and is setthrough a network.The current time will be set through a network, if the TV fails to receive the time information includingthe broadcast signal from TV stations. (ex: Watching TV via set-top box, Satellite receiver, or etc)ManualManually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the currenttime and date.Sleep TimerScreen Menu > System > Time > Sleep Timer Try NowThis function automatically shuts off the TV after a preconfigured period of time. You can set the timerup to 180 minutes in 30 minute increments.
