Using Anynet+ (HDMI-CEC)Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV'sremote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not withthe panel keys.You can configure the TV's universal remote function to control third-party cable boxes, Blu-rayplayers, and home theatres that do not support HDMI-CEC using the TV's remote control. Refer tothe "Controlling External Devices with the TV Remote (Universal Remote Setup)" section for moreinformation.Anynet+ Requirements:● Anynet+ cannot be used to control external devices that do not support HDMI-CEC.● Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may notsupport Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.● The TV remote control may not function under certain circumstances. If this occurs select theAnynet+ device again.● Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only whenthose devices are either in standby mode or turned on.● Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type).With home theatre systems, however, the number of systems that can be controlled is limited toone.● To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMIcable and the device's digital audio output connector directly to the home theatre system.● A home theatre system that has been connected to the TV using an HDMI cable and anoptical cable supports 2-channel audio only. 5.1-channel audio is, however, available for digitalbroadcasts with 5.1-channel audio.Setting Up Anynet+ (HDMI-CEC)System > Anynet+ (HDMI-CEC) Try Now● Anynet+ (HDMI-CEC) Try NowEnables/disables Anynet+ (HDMI-CEC). Set to Off to disable all Anynet+ related features. Set toOn to enable all Anynet+ (HDMI-CEC) related features.● Auto Turn Off Try NowWhen set to Yes. turns off Anynet+ (HDMI-CEC) compatible external devices when the TV isturned off." Some Anynet+ (HDMI-CEC) compatible devices do not support this feature.● Search for DevicesSearch for Anynet+ (HDMI-CEC) compatible devices.
