Controlling External Devices with the TV Remote(Universal Remote Setup)System > Universal Remote Setup" Availability depends on the specific model and area.The universal remote control feature lets you control cable boxes, Blu-ray players, home theatres, andother external devices connected to the TV using the TV's remote control. In order to use the TV'sremote control as a universal remote, you must first connect the IR extender cable (included)." You can also use the Anynet+ (HDMI-CEC) function to operate some external Samsung devices with yourTV's remote control without any additional setup. Refer to the "Using Anynet+ (HDMI-CEC)" section formore information." Certain external devices connected to the TV may not support the universal remote feature.Setting Up the Universal Remote ControlTo use the TV remote as a universal remote, connect the IR extender cable (included) to the OneConnect and position it within 10 cm of the external device's remote control receiver." The colour and design of the IR extender cable may vary depending on the model." When you connect the cable, you have to match the cable’s colour and socket’s colour.Connect the IR extender cable to the One Connect's IR output connector as shown in the diagram andplace the transmitter end within 10 cm of the external device's receiver pointing in the direction of theremote receiver. However, there must be no obstacles between the IR extender cable and the externaldevice. The presence of obstacles interferes with the transmission of the remote control signal." When you use an external device registered with the Universal Remote Control on the Samsung SmartControl, you can use the external device without connecting an IR extender cable. However, if you want touse an external device using Motion Control or Voice Control, be sure to connect an IR extender cable.
