8 EnglishConnectionsConnecting to an AV DeviceUsing an HDMI or HDMI/DVI cable: HD connection (up to 1080p)Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver(STB)✎ HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO INx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-rayplayer, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI(DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.x If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMIversions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /annoying flicker / abnormal colour).x If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If yoususpect the version is older than 1.3, contact the provider of the device to confirm the HDMI version andrequest an upgrade.x It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or aconnection error may occur.Using a Component (up to 1080p) or Audio/Video (480i only) and Scart CableAvailable devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR✎ In Ext. mode, DTV Out supports MPEG SD Video and Audio only.✎ To obtain the best picture quality, the Component connection is recommended over the A/V connection.VIDEO OUTAUDIO OUTR-AUDIO-LP R P B YCOMPONENT OUT AUDIO OUTR-AUDIO-LRG BR B GYYW RWRWRY WR WRR GBEXTVCR / DVDVCRDVD /Blu-Ray playerRedRed WhiteWhite YellowRed Blue GreenHDMI OUTDVI OUTAUDIO OUTR-AUDIO-LWRWRDVD /Blu-ray playerDVD /Blu-ray playerWhiteRed