Setting the Time and Using the TimerSetting the Current TimeSystem > Time > Clock Try NowSet the clock manually or automatically. Once the clock has been set, you can select the INFO buttonto check the current time." The clock must be reset every time the power is disconnected.Setting the Clock using Digital Broadcast InfoSystem > Time > Clock > Clock Mode Try NowSet Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. Toenable this option, the TV's Antenna jack must be connected to either an antenna or a cable outputand must be receiving digital broadcasts. The accuracy of the time information received may varydepending on the channel and signal. If your TV is connected to a set-top-box or satellite box usingHDMI or Component connections, you must set the time manually." Availability depends on the specific model and area.Time OffsetSystem > Time > Clock > Time Offset Try NowIf the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as-/+ 12 hours. Select System > Time > Clock > Time Offset and offset the clock to the correct time." Time Offset adjusts the time through network connections and is only available if the Clock Mode is set toAuto and the TV is connected to the Internet though a local area network." Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcastsignals.Setting the Clock ManuallyManually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the currenttime and date.● Clock Set: Set the current Date and Time.● Time Zone: Select your time zone." This function is only available when the Clock Mode is set to Auto.● DST: Switches the DST (Daylight Saving Time) function on or off." This function is only available when the Clock Mode is set to Auto.● GMT: Selects your time zone." When Country is set to others, you can use this function.
