Samsung UE46ES8000S Quick Setup Manual

Contents

English - 1BN68-04471F-01121"*3*/(1"*3*/(1"*3*/(OPENOPENOPENOPEN112ComponentsTV STB BDVOICE NUMBERRETURN• Smart Touch ControlTV STB BDRETURN VOICE NUMBER• IR BlasterImproved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips whilefocusing on the TV screen. In addition, the built-in Touch Pad removes the need for a mouse when you change the menu settings andsearch for something on the Internet.% For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide (‹ → Support → SmartTouch Control Guide).% Voice Control performance levels will vary based on the language spoken.Smart Touch Control / IR BlasterSmart Touch ControlInstalling batteries (Battery size: AA)1 Press the back of the remote at the very bottom with both thumbs, and thenslide the battery cover up in the direction of the arrow.2 Install two batteries so that the polarity of the batteries (+/-) matches theillustration in the battery compartment.3 Slide the cover down in the direction of the arrow to close the battery cover.Connect the IR Blaster to the TV to control the external device with the Smart Touch Control.If you set the Smart Touch Control to control the external device, the IR Blaster will send the IR Signal to an external device.Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device.Installing batteries (Battery size : AA)IR Blasterࠫൾઘಯீீת0/0''OPENOPEN1"*3*/(121Device Indicator LEDIR Blaster shows the pairingstate.Power SwitchPairing Button1 Hold the both sides of the battery holder and pull it out.2 Install four batteries so that the polarity of the batteries (+/-)matches the illustration in the battery compartment.3 Push it back.SMART TVQUICK SETUP GUIDE