Samsung UN26EH4000 Quick Start Manual

Also see for UN26EH4000: User manual User manual User manual User manual User manual

Contents

=■ Information: Display the information for a show or channel youhave scheduled. You can also change the schedule Information.1. Select the Programmed List icon on the left side of theChannel List screen, and then press the ENTER button.2. On the Programmed List screen, select the show or channelentry you want information for, and then press the TOOLSbutton. The Tools Menu appears.3. Select Information, and then press the ENTER button.The Time Viewing Information screen appears.4. Select Change Info and press the ENTER buttonto change information, or select Close and press theENTER button to close the Information screen.=■ Select All / Deselect All: You can select or deselect allchannels in the channel list.T Other Channel Menu FunctionsChannel Mode (Added Channels/FavoriteChannels)Lets you select the channel list displayed when you press theCH! (Channel) button on your remote. For example, if youselect Favorite Channels, you will only see Favorite channels whenyou press the CH! button.Fine TuneAnalog channels only.If the reception is clear, you do not have to fine tune the channel,as this is done automatically during the search and storeoperation. If the signal is weak or distorted, fine tune the channelmanually.✎ Select the channel, and then select Fine Tune.✎ Fine tuned channels that have been saved are marked withan asterisk “*” on the right-hand side of the channel numberin the channel banner.✎To reset fine-tuning, select the channel, select Fine Tune, andthen select Reset on the Fine Tune screen.Setup MenuPlug & PlayLets you re-run the Plug & Play initial setup procedure. Forinstructions, see your Quick Start Guide.LanguageSet the menu language.✎ Choose between English, Español, and Français.T Setting the TimeTime✎ The time you set will appear when you press the INFObutton.=■ Clock: Set the clock so you can use the various timer featuresof the TV.✎ If you disconnect the power cord, you have to set theclock again.To set the clock, follow these steps:1. Select Setup >Time > Clock.2. Press ENTER and select Auto or Manual, and then pressENTER again.If you selected Auto:The TV will automatically download the correct time from adigital channel.• Select Time Zone, and then press the ENTER button.Use theŸź buttons to select your Time Zone, and thenpress ENTER.• Select DST (Daylight Savings Time), and then pressENTER. Select On if you want to turn the DSTadjustment on and off manually. Select Off to turn off theDST adjustment. Select Auto if you want the TV to adjustto DST automatically. Press ENTER when done.✎ DST and Time Zone function are only available whenthe Clock Mode is set to Auto.If you selected Manual:The Clock Set screen appears. Use the Ÿź buttons tochange the values in each field or use the number buttons toenter the values directly. Use the ŻŹ buttons to move fromfield to field. When done with all the fields, press ENTER.✎ Available only when Clock Mode is set to Manual.=■ Sleep Timer 8Automatically shuts off the TV after a preset period of time. (30,60, 90, 120, 150 and 180 minutes).✎ To cancel the Sleep Timer, select Off.Timer 1 / Timer 2 / Timer 3Turns the TV on and off automatically at times and days youselect. You can set three different on/off timer settings.✎ You must set the clock first.=■ On Time / Off Time: Set the hour, minute, am/pm, andActivate/Inactivate fields for the On Time and Off Time. Use theŻŹ buttons to move from field to field. Use the Ÿź buttonsto change the values in each field. To activate the timer withthe setting you have chosen, set the Activate/Inactivate field toActivate.=■ Volume: Set the desired loudness.=■ Contents: To select what will be turned on when the timersetting is activated. You can set the TV to turn on a specificchannel or play back contents such as photo or audio files.Use the ŻŹ buttons to move to move to the Contents field,and then press the ENTER button. The Contents screenappears. Use the ŻŹ buttons to move from field to field. Usethe Ÿź buttons to change the values in each field.- TV/USB: Select TV or USB. The USB device must beconnected to your TV before you can select USB.- Antenna: Displays the current antenna source, Air or Cable.- Channel: If you have selected TV, select the desired channel.- Music/Photo: If you have selected USB, follow these steps toselect a folder containing MP3 (Music) or JPEG (Photo) files onthe USB device:✎ The maximum displayed number of files, including subfolders, in one folder of USB storage device is 2000.✎ The media may not be playing smoothly when using thedevice lower than USB 2.0.1. Use the ŻŹ buttons to move to the field under Musicor the field under Photo, and then press the ENTERbutton. The TV displays a single folder (the Root folder)and the type or name of the device.- 6 -