Samsung UN40D6400UF User Manual

Also see for UN40D6400: E-manual User manual User manual E-manual E-manual

Contents

English - 15Wired/Wireless Network ConnectionYou can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wirelessconnection.Network Connection - WirelessYou can connect your TV to your LAN through a standard wireless router or modem.This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n.When you play video over a IEEE 802.11b/g connection, the video may not play smoothly.Most wireless network systems incorporate a security system that requires devices that access the network through an accesspoint or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key.If you select Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Ficertification specifications.Configuring the Network Connection - WirelessThe instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure networkconnections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.To configure your network connection for a network that uses DHCP, follow these steps:1. Connect your TV to your network as shown in the illustration above.2. Turn on your TV, press the MENU button on your remote, and theselect Network → Network Settings.3. Select the Wireless (General), press ENTERE, and then pressENTERE again.4. The Network function searches for available wireless network.When done, it displays a list of the available networks.5. In the list of networks, press the ▲ or ▼ button to select anetworks, select Next, and then press ENTERE.6. If you have selected a wireless router that has security, theSecurity Key screen appears. Enter the Security key (SecurityKey or PIN), select Next, and then press ENTERE.✎ When you enter the Security Key (Security Key or PIN), use▲/▼/◄/► buttons on your remote to select numbers and characters.7. The Network Connection screen appears and verifies the network connection. When the connection has been verified, the“Internet connection successful.” message appears. Network set up is complete.✎ For more detailed information, see “Wireless Network Connection” in the e-Manual.The LAN Port on the WallLAN Cable (Not Supplied)Wireless IP Sharer(AP having DHCP Server)Network SettingsWiredPreviousNextCancelWireless(General)WPS(PBC)One Foot ConnectionSelect a network connection type.Set up wireless networkby selecting your WirelessRouter. you may need to entersecurity key depending onthe setting of the WirelessRouter.✎ The displayed imange may differ dependingon the model.TV Rear PanelSamsung WirelessLAN Adapter