EnglishBasic FeaturesPicture Reset (OK / Cancel)Resets your current picture mode to its default settings. Setting up the TV with Your PCSet the input source to PC.MENU Picture ENTERAuto Adjustment Adjust frequency values/positions and fine tune the settingsautomatically.✎ Not available when connecting with an HDMI/DVI cable.Screen■ Coarse / Fine: Removes or reduces picture noise. If thenoise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjustthe picture so that it is aligned to the center of screen.■ Position: Adjust the PC’s screen positioning if it doesnot fit the TV screen. Press the or button to adjustthe Vertical-Position. Press the or button to adjustthe Horizontal-Position.■ Image Reset: Resets the image to default settings.Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP)Depending on the version of Windows and the video card,the actual screens on your PC will probably look different, butthe same basic set-up information will apply in most cases.(If not, contact your computer manufacturer or SamsungDealer.)1. Click on “Control Panel” on the Windows start menu.2. Click on “Appearance and Themes” in the “ControlPanel” window and a display dialog-box will appear.3. Click on “Display” and a display dialog box will appear.4. Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution) [Optimum: 1920 X1080 pixels] If a vertical-frequency option exists on your displaysettings dialog box, the correct value is “60” or “60 Hz”.Otherwise, just click “OK” and exit the dialog box.Sound Menu Changing the Preset Sound ModeMENU Sound SRS TheaterSound ENTERSRS TheaterSound ■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired. Adjusting Sound SettingsMENU Sound Equalizer ENTEREqualizerAdjusts the sound mode (standard sound mode only).■ Balance L/R: Adjusts the balance between the right andleft speaker.■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (BandwidthAdjustment): Adjusts the level of specific bandwidthfrequencies.■ Reset: Resets the equalizer to its default settings.