Samsung UN60EH6003 User Manual

Also see for UN60EH6003: User manual User manual User manual User manual

Contents

user manual

Connections For better picture and audio quality, connect to a digital device using an HDMI cable. The picture may not display normally (if at all) or the audio may not work if an externaldevice that uses an older version of HDMI mode is connected to the TV. If such a problemoccurs, ask the manufacturer of the external device about the HDMI version and, if out ofdate, request an upgrade. Be sure to purchase a certifi ed HDMI cable. Otherwise, the picture may not display or aconnection error may occur. PC(D-Sub) and PC/DVI AUDIO IN input are not supported. For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. Connecting through the HDMI cable may not be supported depending on the PC. If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work. EX-LINK: Connector for service only.Remote Control✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.Figures and illustrations in this User Manual are provided for referenceonly and may differ from actual product appearance. Product design andspecifications may be changed without notice.Important Warranty Information RegardingTelevision Format Viewing✎ See the warranty card for more information on warranty terms.Wide screen format LED Displays (16:9, the aspect ratio of the screen width toheight) are primarily designed to view wide screen format full-motion video. Theimages displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and the images areconstantly moving. Displaying stationary graphics and images on screen, such as thedark sidebars on non- expanded standard format television video and programming,should be limited to no more than 5% of the total television viewing per week.Additionally, viewing other stationary images and text such as stock market reports,video game displays, station logos, web sites or computer graphics and patterns,should be limited as described above for all televisions. Displaying stationary imagesthat exceed the above guidelines can cause uneven aging of LED Displays that leavesubtle, but permanent burned-in ghost images in the LED picture. To avoid this, varythe programming and images, and primarily display full screen moving images, notstationary patterns or dark bars. On LED models that offer picture sizing features,use these controls to view different formats as a full screen picture. Be careful in theselection and duration of television formats you use for viewing. Uneven LED aging asa result of format selection and use, as well as burned-in images, are not covered byyour Samsung limited warranty.• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENTSubject to the requirements, conditions, exclusions and limitations of the originalLimited Warranty supplied with Samsung Electronics (SAMSUNG) products, and therequirements, conditions, exclusions and limitations contained herein, SAMSUNGwill additionally provide Warranty Repair Service in the United States on SAMSUNGproducts purchased in Canada, and in Canada on SAMSUNG products purchasedin the United States, for the warranty period originally specified, and to the OriginalPurchaser only.The above described warranty repairs must be performed by a SAMSUNG AuthorizedService Center. Along with this Statement, the Original Limited Warranty Statementand a dated Bill of Sale as Proof of Purchase must be presented to the ServiceCenter. Transportation to and from the Service Center is the responsibility of thepurchaser. Conditions covered are limited only to manufacturing defects in material orworkmanship, and only those encountered in normal use of the product. Excluded, butnot limited to, are any originally specified provisions for, in-home or on-site services,minimum or maximum repair times, exchanges or replacements, accessories, options,upgrades, or consumables.For the location of a SAMSUNG Authorized Service Center, please call toll-free:–– In the United States : 1-800-SAMSUNG (1-800-726-7864)–– In Canada : 1-800-SAMSUNGStill image warningAvoid displaying still images (such as jpeg picture files) or still image elements (suchas TV channel logos, panorama or 4:3 image format, stock or news bars at screenbottom etc.) on the screen. Constant displaying of still pictures can cause ghosting ofLED screen, which will affect image quality. To reduce risk of this effect, please followbelow recommendations:• Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu forbest possible match.• Reduce brightness and contrast values to minimum required to achieve desiredpicture quality, exceeded values may speed up the burnout process.• Frequently use all TV features designed to reduce image retention and screenburnout, refer to proper user manual section for details.Securing the Installation SpaceKeep the required distances between the product and other objects (e.g. walls) toensure proper ventilation.Failing to do so may result in fire or a problem with the product due to an increase inthe internal temperature of the product.✎ When using a stand or wall-mount, use parts provided by SamsungElectronics only. If you use parts provided by another manufacturer, it may result in aproblem with the product or an injury due to the product falling.✎ The appearance may differ depending on the product.✎ Be careful when you contact the TV because some parts can be somewhathot.Installation with a stand. Installation with a wall-mount.4inches4inches4inches4inches4inches4inches4inchesChannel Menu❑ Seeing ChannelsChannel ListAdd, delete or set Favorite channels and use the program guide fordigital broadcasts. Select a channel in the All Channels, AddedChannels, Favorite or Programmed screen by pressing the ▲/ ▼ buttons, and pressing the ENTERE button. Then you canwatch the selected channel.Added Channels6 Air6-1 ♥ TV #67-1 ♥ TV #78 Air9 Air9-1 ♥ TV #910 Air10-1 ♥ TV #1011-1 ♥ TV #11Air ' Zoom ' Select T Tools ► Next Program■ All Channels: Shows all currently available channels.■ Added Channels: Shows all added channels.■ * Favorite: Shows all favorite channels.■ Programmed: Shows all currently reserved programs.✎ Using the remote control buttons with the Channel List Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. Select desiredchannels and press the Yellow button to set all the selectedchannels at the same time. The c mark appears to the left ofthe selected channels. T (Tools): Displays the Channel List option menu. (TheOptions menus may differ depending on the situation.)Channel Status Display iconsIcons Operationsc A channel selected.* A channel set as a Favorite.) A reserved program.( A program currently being broadcast.❑ Memorizing channelsAntenna (Air / Cable) tBefore your television can begin memorizing the available channels,you must specify the type of signal source that is connected to theTV (i.e. an Air or a Cable system).Auto Program✎ When selecting the Cable TV system: Selects the cablesystem. STD, HRC and IRC identify various types of cableTV systems. Contact your local cable company to identify thetype of cable system that exists in your particular area. At thispoint, the signal source has been selected.✎ After all the available channels are stored, it starts toremove scrambled channels. The Auto program menu thenreappears.✎ Press the ENTERE button to stop the channel store duringAuto Program.How to Stop Auto Programming1. Press the ENTERE button.2. A message will ask Stop Auto Program? Select Yes bypressing the ◄ or ► button.3. Press the ENTERE button.❑ Other FeaturesClear Scrambled ChannelThis function fi lters out scrambled channels after Auto Program iscompleted. This process may take up to 20~30 minutes.✎ Press the ENTERE button to stop the Clear ScrambledChannel.✎ This function is only available in Cable mode.Channel ListChannel List Option Menu tSet each channel using the Channel List menu options. Optionmenu items may differ depending on the channel status.■ Add / Delete: Delete or add a channel to display the channelsyou want.✎ All deleted channels will be shown on the All Channelsmenu.✎ A gray-colored channel indicates the channel has beendeleted.✎ The Add menu only appears for deleted channels.✎ Delete a channel from the Added Channels or Favoritemenu in the same manner.■ Add to Favorite / Delete from Favorite t: Set channelsyou watch frequently as Favorites.■ Timer Viewing: You can set a desired channel to be displayedautomatically at the set time; even when you are watchinganother channel. Set the current time fi rst to use this function.✎ Only memorized channels can be reserved.✎ Reserved programs will be displayed in the Programmedmenu.✎ When a digital channel is selected, press the ► (NextProgram) button to view the digital program. If you selectthe ENTERE(Schedule) button on the next program, youcan set Timer Viewing directly.■ Channel Name Edit (analog channels only): Assign your ownchannel name.■ Select All: Select all the channels in the channel list.■ Deselect All: Deselect all the selected channels.✎ You can only select Deselect All when one or morechannels are selected.■ Auto Program: Scans for a channel automatically and stores inthe TVProgrammed(in Channel List)You can view, modify or delete a show you have reserved to watch.■ Change Info: Change a show you have reserved to watch.■ Cancel Schedules: Cancel a show you have reserved to watch.■ Information: Display a show you have reserved to watch. (Youcan also change the reservation Information.)■ Select All / Deselect All: You can select or deselect all channelsin the channel list.Sound MenuMode t■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency sounds to allow abetter listening experience for the hearing impaired.Equalizer(standard sound mode only)■ Balance L/R: Adjusts the balance between the right and left speaker.■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):Adjusts the level of specifi c bandwidth frequencies.■ Reset: Resets the equalizer to its default settings.SRS TruSurround HD(standard sound mode only)SRS TruSurround HD is a patented SRS technology that solves theproblem of playing 5.1 multichannel content over two speakers.TruSurround delivers a compelling, virtual surround sound experiencethrough any two-speaker playback system, including internaltelevision speakers. It is fully compatible with all multichannel formats.Preferred Language(digital channels only)Digital-TV broadcasts are capable of simultaneous transmission ofmany audio tracks (for example, simultaneous translations of theprogram into foreign languages).✎ You can only select a language from among the ones beingbroadcasted.Multi-Track Sound (MTS)(analog channels only)■ Mono: Choose for channels that are broadcasting in mono or ifyou are having diffi culty receiving a stereo signal.■ Stereo: Choose for channels that are broadcasting in stereo.■ SAP: Choose to listen to the Separate Audio Program, which isusually a foreign-language translation.✎ Depending on the program being broadcast, you can listen toMono, Stereo or SAP.Auto VolumeBecause each broadcasting station has its own signal conditions,the volume may fl uctuate each time channel is changed. This featurelets you automatically adjust the volume of the desired channel bylowering the sound output when the modulation signal is high or byraising the sound output when the modulation signal is low.Sound Reset■ Reset All: Resets all sound settings to the factory defaults.Setup Menu❑ Setting the TimeTime✎ The current time will appear every time you press the INFObutton.■ Clock: Setting the clock is for using various timer features of theTV.✎ If you disconnect the power cord, you have to set the clockagain.Clock Mode: Set the current time manually or automatically.Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.✎ Available only when Clock Mode is set to Manual.Time Zone: Select your time zone.DST (Daylight Saving Time): Switches the DST (Daylight SavingTime) function on or off.✎ DST and Time Zone function is only available when theClock Mode is set to Auto.■ Sleep Timer tAutomatically shuts off the TV after a preset period of time. (30,60, 90, 120, 150 and 180 minutes).✎ To cancel the Sleep Timer, select Off.Timer 1 / Timer 2 / Timer 3Three different on / off timer settings can be made. You must set theclock fi rst.■ On Time / Off Time: Set the hour, minute, am/pm and Activate /Inactivate. (To activate the timer with the setting you have chosen,set to Activate.)■ Volume: Set the desired volume level.■ Contents: When the On Time is activated, you can turn on aspecifi c channel or play back contents such as photo or audio fi les.- TV/USB: Select TV or USB. (Make sure that an USB device isconnected to your TV.)- Antenna: Displays the current antenna source.- Channel: Select the desired channel.- Music/Photo: Select the folder containing MP3/JPEG fi les on theUSB device.✎ The maximum displayed number of files, including subfolders, in one folder of USB storage device is 2000.✎ The media may not be playing smoothly when using thedevice lower than USB 2.0.■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun orManual to set at you convenience. If you select Manual, you canset up the day you want to activate the timer.Contact SAMSUNG WORLD WIDEIf you have any questions or comments relating to Samsung products, pleasecontact the SAMSUNG customer care center.Country CANADA U.S.AAddressSamsung ElectronicsCanada Inc.,Customer Service55 Standish CourtMississaugaOntario L5R 4B2 CanadaSamsung ElectronicsAmerica, Inc.85 Challenger RoadRidgefi eld Park, NJ 07660Customer CareCenter  1-800-SAMSUNG (726-7864)Web Sitewww.samsung.com/ca(English)www.samsung.com/ca_fr(French)www.samsung.com/usLED TVuser manualGetting StartedAccessories• Remote Control (AA59-00666A) &Batteries (AAA x 2)• Warranty Card / Safety Guide• Owner’s Instructions• Power CordInput Cables (Sold Separately)• RS232 (AA39-00311A)• Audio• HDMI• HDMI-DVI• Component• Composite (AV)• Coaxial (RF)✎ Check the cable before plug-inCable PortsHDMIUSBDo not plug cable upside down.Be sure to check before plug-in.TV Controller (Panel Key)Power on Turns the TV on by pressing the controller in standby mode.Adjusting the volume Adjusts the volume by moving the controller from side toside when the power is on.Selecting a channel Selects a channel by moving the controller up and downwhen the power is on.Using the function menuPress the controller when the power is on, then the functionmenu screen appears. If you press it again, the functionmenu screen disappears.Selecting the Media PlaySelects the MEDIA.P by moving the controller in thefunction menu screen. The Media Play main screenappears.Selecting the MENU (m)Selects the MENU(m) by moving the controller in thefunction menu screen. The OSD(On Screen Display) of yourTV’s feature appears.Selecting the SourceList (s)Selects the Source List(s) by moving the controller in thefunction menu screen. The Source List screen appears.Power Off (P) Selects the Power Off (P) to turn the TV off by moving thecontroller in the function menu screen.✎ Exits the menu when pressing the controller more than 1 second.✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, youcannot operate it to move the up/down/left/right directions.Plug & Play (Initial Setup)When you turn the TV on for the fi rst time, a sequence of on-screenprompts will assist in confi guring basic settings. Press the POWERbutton. Plug & Play is available only when the Input source is set toTV.✎ Connecting the power cord and antenna. (refer to‘Connections’)Selecting a languageSelect Language of the OSD.LanguageU Move E EnterPlug & PlayEnglishEspañolFrançaisSelect the desired OSD (On ScreenDisplay) language.Selecting a Home Use modeSelect ‘Home Use’ when installing this TV in your home.L Move E EnterPlug & PlayHome UseStore Demo• Select the Home Use mode. StoreDemo mode is for retail environments.• When pressing TV controller, thefunction menu screen appears. Selectthe MENU(m) and press it more than 5seconds using the controller. The StoreDemo mode is set. Cancel the StoreDemo by selecting Source List(s)and pressing it more than 5 seconds.Selecting an antennaSelect the Antenna source to memorize.Air StartCable StartAuto StartU Move E Enter m SkipPlug & PlayIn Cable mode, you can select the correctsignal source among STD, HRC, and IRCby pressing the ▲, ▼, ◄ or ► button.Setting the Clock ModeSet the Clock Mode.Clock Mode : AutoPlug & PlayE Enter m SkipSet the Clock Mode automatically ormanually.• If you select the Auto, set theDST(Daylight Saving Time).• On the DST screen, press ENTERE,then select whether to turn DST(Daylight Savings Time) on or off. Selectthe time zone where you live.Viewing the HD Connection GuideThe connection method for the best HD screen quality is displayed.Enjoy your TV.Press the ENTERE button.Changing the Input SourceSource ListUse to select TV or an external input source such as a DVD player /Blu-ray player / cable box / STB satellite receiver.1. Press the SOURCE button.2. Select a desired external input source.■ TV / AV / Component / HDMI1/DVI / HDMI2✎ You can only choose external devices that are connected to theTV. In the Source List, connected inputs will be highlighted.How to use Edit NameEdit Name lets you associate a device name to an input source. Toaccess Edit Name, press the TOOLS button in Source List. Thefollowing selections appear under Edit Name:■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AVReceiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV/ Blu-ray / HD DVD / DMA: Name the device connected to theinput jacks to make your input source selection easier.✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMIcable, you should set the TV to PC mode under Edit Name.✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMIto DVI cable, you should set the TV to DVI PC mode under EditName.✎ When connecting an AV devices to the HDMI IN 1(DVI) portwith HDMI to DVI cable, you should set the TV to DVI modeunder Edit Name.InformationYou can see detailed information about the connected externaldevice.❑ Other FeaturesProgram Rating LockThe Program Rating Lock feature automatically locks outprograms that are deemed inappropriate for children. The usermust enter a PIN (personal identifi cation number) before any of theProgram Rating Lock restrictions are set up or changed.✎ Program Rating Lock is not available in HDMI orComponent mode.✎ The default PIN number of a new TV set is “0-0-0-0”.■ Program Rating Lock: You can block rated TV Programs.■ TV Parental Guidelines: You can block TV programsdepending on their rating. This function allows you to controlwhat your children are watching.■ MPAA Rating: You can block movies depending on their MPAArating. The Motion Picture Association of America(MPAA) hasimplemented a rating system that provides parents or guardianswith advanced information on which fi lms are appropriate forchildren.■ Canadian English: You can block TV programs depending ontheir Anglophone Canadian.■ Canadian French: You can block TV programs depending ontheir French Canadian rating.■ Downloadable U.S. Rating: Parental restriction information canbe used while watching DTV channels.■ Change PIN: The Change PIN screen will appear. Choose any4 digits for your PIN and enter it in Enter New PIN. Re-enterthe same 4 digits in Confi rm New PIN. When the ChangePIN screen disappears, press the OK button. The TV hasmemorized your new PIN.✎ If you forget the PIN, press the remote-control buttons inthe following sequence, which resets the pin to “0-0-0-0” :POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)LanguageSet the menu language.✎ Choose between English, Español and Français.Game ModeWhen connecting to a game console such as PlayStation™ orXbox™, you can enjoy a more realistic gaming experience byselecting the game menu.✎ Precautions and limitations for game mode To disconnect the game console and connect another externaldevice, set Game Mode to Off in the setup menu. If you display the TV menu in Game Mode, the screen shakesslightly.✎ Game Mode is not available when the input source is setto TV.✎ After connecting the game console, set Game Mode to On.Unfortunately, you may notice reduced picture quality.Caption(On-Screen Text Messages)■ Caption: You can switch the caption function on or off. Ifcaptions are not available, they will not be displayed on thescreen.✎ The Caption feature does not work in Component orHDMI mode.■ Caption Mode: You can select the desired caption mode.Default / CC1~CC4 / Text1~Text4: (analog channels only) TheAnalog Caption function operates in either analog TV channelmode or when a signal is supplied from an external device tothe TV. (Depending on the broadcasting signal, the AnalogCaption function may or may not work with digital channels.)Default / Service1~Service6 / CC1~CC4 / Text1~Text4:(digital channels only) The Digital Captions function works withdigital channels.✎ Service1~6 may not be available in digital caption modedepending on the broadcast.■ Digital Caption Options: (digital channels only)Size: Options include Default, Small, Standard and Large. Thedefault is Standard.Font Style: Options include Default and Styles 0 to 7. Thedefault is Style 0.Foreground Color: Options include Default, White, Black, Red,Green, Blue, Yellow, Magenta and Cyan.You can change the color of the letter. The default is White.Background Color: Options include Default, White, Black, Red,Green, Blue, Yellow, Magenta and Cyan. You can change thebackground color of the caption. The default is Black.Foreground Opacity: This adjusts the opacity of text. Optionsinclude Default, Transparent, Translucent, Solid and Flashing.Background Opacity: This adjusts the opacity of the captionbackground. Options include Default, Transparent, Translucent,Solid and Flashing.Return to Default: This option sets each Size, Font Style,Foreground Color, Background Color, Foreground Opacity andBackground Opacity to its default.✎ Digital Caption Options are available only when Defaultand Service1 ~ Service6 can be selected in CaptionMode.✎ The Foreground and Background cannot be set to havethe same color.MelodySet so that a melody plays when the TV is turned on or off.✎ The Melody does not play. When no sound is output from the TV because the MUTEbutton has been pressed. When no sound is output from the TV because the volume hasbeen reduced to minimum with the VOL – button. When the TV is turned off by Sleep Timer function.Auto Protection Time■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10hours): If the screen remains idle with a still image for a certainperiod of time defi ned by the user, the screen saver is activatedto prevent the formation of ghost images on the screen.© 2013 Samsung Electronics Co., Ltd. All rights reserved.Press to select additional channels (digital) beingbroadcasted by the same station. For example,to select channel ‘54-3’, press ‘54’, then press‘-’ and ‘3’.Returns to the previous channel.Press to directly access to channels.Turns the TV on and off.Use these buttons in a specific feature.P.SIZE: Lets you choose the picture size.MTS: Press to choose stereo, mono or Separate AudioProgram (SAP broadcast).CC: Controls the caption decoder.Cuts off the sound temporarily.Automatically shuts off the TV at a presettime.Displays the channel list on the screen.Displays information on the TV screen.Quickly select frequently used functions.Selects the on-screen menu items and changes thevalues seen on the menu.Exit the menu.Returns to the previous menu.Displays and selects the available videosources.Use these buttons according to thedirection on screen.Changes channels.Displays the main on-screen menu.Views the Media Play.Adjusts the volume.MEDIA.P SLEEPHDMI OUTHDMI OUTAUDIO OUTL-AUDIO-RCOMPONENT OUTP RPBYDVI OUTW RRWW RRWVIDEO OUTANT OUTYRYRRBRGRG BAUDIO OUTL-AUDIO-RVCRBlu-ray playerCableorPower InputTV Rear PanelVHF/UHF AntennaAV Device (3)Using Audio/VideoCablesAV Device (2)Using a ComponentCable (up to 1080p)Media PlayUsing a USB Drive PCUsing an HDMI Cable oran HDMI to DVI Cable.Use the PC speakersfor audio.AV Device (1)Using an HDMI Cable(up to 1080p)Blu-ray player / DVD / cable box/ sat boxPC- 2 -- 1 -- 6 -- 5 -- 3 -- 7 -- 4 -- 8 -BN68-04674BBN68-04674B-01Display Modes (HDMI/DVI Input)Optimal resolution is 1920 x 1080@60Hz.Mode Resolution HorizontalFrequency (KHz)Vertical Frequency(Hz)Pixel ClockFrequency (MHz)Sync Polarity(H / V)IBM 640 x 350 31.469 70.086 25.175 +/-720 x 400 31.469 70.087 28.322 -/+MAC640 x 480 35.000 66.667 30.240 -/-832 x 624 49.726 74.551 57.284 -/-1152 x 870 68.681 75.062 100.000 -/-VESA DMT640 x 480 31.469 59.940 25.175 -/-640 x 480 37.861 72.809 31.500 -/-640 x 480 37.500 75.000 31.500 -/-800 x 600 37.879 60.317 40.000 +/+800 x 600 48.077 72.188 50.000 +/+800 x 600 46.875 75.000 49.500 +/+1024 x 768 48.363 60.004 65.000 -/-1024 x 768 56.476 70.069 75.000 -/-1024 x 768 60.023 75.029 78.750 +/+1152 x 864 67.500 75.000 108.000 +/+1280 x 720 45.000 60.000 74.250 +/+1280 x 800 49.702 59.810 83.500 -/+1280 x 1024 63.981 60.020 108.000 +/+1280 x 1024 79.976 75.025 135.000 +/+1366 x 768 47.712 59.790 85.500 +/+1440 x 900 55.935 59.887 106.500 -/+1600 x 900RB 60.000 60.000 108.000 +/+1680 x 1050 65.290 59.954 146.250 -/+1920 x 1080 67.500 60.000 148.500 +/+Installing batteries (Battery size: AAA)✎ NOTE Use the remote control within 23 feet from TV. Bright light may affect the performance of the remote control.Avoid use when nearby fluorescent lights or neon signs. The Color and shape may vary depending on the model.Channel ModeChange the channel mode directly between Added Channels andFavorite Channels.✎ The Favorite Channels is enabled only when you set Add toFavorite.Fine Tune(analog channels only)If the reception is clear, you do not have to fi ne tune the channel, asthis is done automatically during the search and store operation. If thesignal is weak or distorted, fi ne tune the channel manually.✎ Fine tuned channels that have been saved are marked with anasterisk “*” on the right-hand side of the channel number in thechannel banner.✎ To reset the fine-tuning, select Reset.Picture MenuMode tSelect your preferred picture type.✎ When connecting a PC, you can only select Entertain andStandard.■ Dynamic: Suitable for a bright room.■ Standard: Suitable for a normal environment.■ Movie: Suitable for watching movies in a dark room.■ Entertain: Suitable for watching movies and games.✎ Only available when connecting a PC.Backlight / Contrast / Brightness / Sharpness /Color / Tint (G/R)Your television has several setting options for picture quality control.✎ When connecting a PC, you can only make changes toBacklight, Contrast, Brightness and SharpnessAdvanced Settings(available in Standard / Movie mode)Compared to previous models, new Samsung TVs have a moreprecise picture.✎ When connecting a PC, you can only make changes to Gammaand White Balance.■ Color Space (Auto / Native): Adjusts the range of colors availableto create the image.■ White Balance: Adjusts the color temperature for a more naturalpicture.R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,blue) darkness.R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)brightness.Reset: Resets the White Balance to it’s default settings.■ Gamma: Adjusts the primary color intensity.■ Dynamic Contrast (Off / Low / Medium / High): Adjusts thescreen contrast.■ Black Tone (Off / Dark / Darker / Darkest): Select the black levelto adjust the screen depth.■ Flesh Tone: Emphasize pink “fl esh tone”.■ Motion Lighting (Off / On): Reduce power consumption bybrightness control adapted motion.✎ Available in Standard mode only.Picture Options✎ When connecting a PC, you can only make changes to theColor Tone, Size and HDMI Black Level.■ Color Tone (Cool / Standard / Warm1 / Warm2)✎ Warm1 or Warm2 will be deactivated when the picture modeis Dynamic.■ Size: Your cable box/satellite receiver may have its own set ofscreen sizes as well. However, we highly recommend you use 16:9mode most of the time.16:9: Sets the picture to 16:9 wide mode.Zoom1: Use for moderate magnifi cation.Zoom2: Use for a stronger magnifi cation.Wide Fit: Enlarges the aspect ratio of the picture to fi t the entirescreen.4:3: Sets the picture to basic (4:3) mode.✎ Do not watch in 4:3 format for a long time. Traces of bordersdisplayed on the left, right and center of the screen maycause image retention (screen burn) which are not coveredby the warranty.Screen Fit (DTV): Displays the full image without any cut-off whenHDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)signals are inputted.✎ HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p(1280x720)✎ Settings can be adjusted and stored for each external deviceyou have connected to an input on the TV.✎ Picture Sizes available by Input Source:Input Source Picture SizeATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3DTV(1080i, 1080p), Component(1080i, 1080p), HDMI (720p, 1080i,1080p)16:9, Wide Fit, 4:3, Screen Fit■ Digital Noise Filter (Off / Low / Medium / High / Auto): If thebroadcast signal received by your TV is weak, you can activate theDigital Noise Filter feature to reduce any static and ghosting thatmay appear on the screen.✎ When the signal is weak, try other options until the bestpicture is displayed.■ HDMI Black Level (Normal / Low): Selects the black level on thescreen to adjust the screen depth.✎ Available only in HDMI mode (RGB signals).■ Film Mode (Off / Auto): Sets the TV to automatically sense andprocess fi lm signals from all sources and adjusts the picture foroptimum quality.✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i /1080i) and HDMI (480i / 1080i).■ Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /Demo): Enhances motion in fast moving scenes.✎ The info screen on your TV displays the resolution andfrequency of the incoming video signal (60Hz). This displayedfrequency is not what the TV is displaying by using the AutoMotion Plus function.■ LED Motion Plus (Off / On): Removes drag from fast scenes witha lot of movement to provide a clear picture.Picture ResetResets your current picture mode to its default settings.■ Reset Picture Mode: Returns all picture values in the currentlyselected mode to the default settings.Remote control sensorTV ControllerFunction menuMEDIA.Pm R sPReturn[UEH6003-ZC]BN68-04674B-01ENG.indd 1 2013-08-12 4:50:35

/ 2

Related manuals for Samsung UN60EH6003