Samsung UN60EH6003F User Manual

Also see for UN60EH6003: User manual User manual User manual User manual

Contents

user manual

Auto ProgramThe Auto Program function memorizes all channels that areavailable over the air or through your cable system and adds them tothe Channel List.To start Auto Program, follow these steps:1. Push MENUm → Channel → Auto Program → ENTERE onyour remote. The Antenna Source screen appears.2. On the Antenna Source screen, select the source of your TVsignal.AirIf your TV is connected to an antenna choose Air, and then pressENTERE. The TV will automatically start memorizing channels.CableIf your TV is connected to a cable outlet, choose Cable, and thenpress ENTERE. Go to Step 3.AutoIf you choose Auto, and then press ENTERE, the TV willautomatically select the correct Antenna source. Go toStep 3.3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to selectthe type of digital and analog cable systems you have: STD, HRC,or IRC. Most systems are STD (Standard). When done, selectStart, and then press ENTERE. The TV will start memorizingchannels.✎ Channel memorization can take up to 45 minutes, dependingon your cable system.✎ Memorized channels are added to the Added Channelslist. These are the channels you will see when you use theChannel buttons on your remote.Clear Scrambled ChannelThis function filters out scrambled channels after Auto Program iscompleted. This process may take up to 20~30 minutes.✎ Press the ENTERE button to stop the Clear ScrambledChannel.✎ This function is only available in Cable mode.❑ Managing ChannelsChannel ListSee your list of Added channels, Favorite channels, or channelsyou've scheduled for viewing. Add or delete Favorite channels, addor delete channels from the Added Channels list, schedule channelsor programs for viewing. Watch a channel by selecting the channelin the All Channels, Added Channels, or Favorite screen, pressingthe ▲ / ▼ buttons, and then pressing the ENTERE button.Added Channels6 Air6-1 ♥ TV #67-1 ♥ TV #78 Air9 Air9-1 ♥ TV #910 Air10-1 ♥ TV #1011-1 ♥ TV #11Air ' Zoom ' Select T Tools ► Next ProgramChannel List Screens icons are listed on the left side. Select anicon using the ▲/▼ buttons to view each list.■ All Channels: Shows all currently available channels includingthose you deleted from the Added Channelslist.■ Added Channels: Shows all Added Channels. These are thechannels that appear when you press the CH button.■ * Favorite: Shows all favorite channels.■ Programmed: Shows all channels and programs currentlyscheduled using Timer Viewing.✎ Remote control buttons active on the Channel List screen.x Green (Zoom): Enlarges or shrinks a channel number.x Yellow (Select): Move the cursor to a channel. Press the Yellowbutton to select the channel. A c mark appears. Repeat to selectadditional channels. Then, open the Tools menu and apply afunction to the channels you selected.x T (Tools): Displays the Channel List Tools menu. (The Toolsmenus may differ depending on the situation.)Display Icons Used in the Channel List ScreensIcons Meaningc A selected channel.* A Favorite channel.) A reserved program.( A program currently being broadcast.❑ The Channel List Tools Menu tThe Channel List Tools menu contains most of the functions youcan use on the All Channel, Added Channels, and Favorite Listscreens. To view, select a list screen, select a channel, and thenpress the TOOLS button.■ Add / Delete: Delete a channel from or add a channel to theAdded Channels list.To delete channels from the Added Channels list, follow these steps:1. Select one or more channels in the Added Channels list usingthe ▲/▼ buttons and the Yellow Select button on your remote.2. Press the TOOLS button on your remote. The Tools menuappears.3. Select Delete in the Tools menu, and then press the ENTEREbutton.To add channels to the Added Channels list, follow these steps:1. Select one or more channels in the All Channels list using the▲/▼ buttons and the Yellow Select button on your remote.2. Press the TOOLS button on your remote. The Tools menuappears.3. Select Add in the Tools menu, and then press the ENTEREbutton.✎ All deleted channels will be shown on the All Channels list.You add channels back to the Added Channels list on theAll Channels list.✎ A gray-colored channel indicates the channel has beendeleted from the Added Channels list.✎ The Add menu option only appears for deleted channels.■ Add to Favorite/Delete from Favorite t: Lets you addchannels to and delete channels from your Favorites list.To add channels to the Favorites list, follow these steps:1. Select one or more channels in the All Channels list using the▲/▼ buttons and the Yellow Select button on your remote.2. Press the TOOLS button on your remote. The Tools menuappears.3. Select Add to Favorite in the Tools menu, and then press theENTERE button.To delete channels from the Favorites list, follow these steps:1. Select one or more channels in the Favorite Channels listusing the ▲/▼ buttons and the Yellow Select button on yourremote.2. Press the TOOLS button on your remote. The Tools menuappears.3. Select Delete from Favorite in the Tools menu, and thenpress the ENTERE button.■ Timer Viewing: You can schedule a channel to be displayedautomatically at a set time, even when you are watching anotherchannel. You must set the current time first in the Time > Clockfunction to use Time Viewing.To schedule a channel, follow these steps:1. Select a channel in the Added Channels list using the ▲/▼buttons and the Yellow Select button on your remote.2. Press the TOOLS button on your remote. The Tools menuappears.3. Select Time Viewing in the Tools menu, and then press theENTERE button. The Time Viewing screen appears.Antenna Channel Repeat▲DTV Air 6-1 Once▼L Move U Adjust E Enter R ReturnTimer ViewingDate Start Time01-01-2012 12 : 01 am4. Use the ◄/► buttons to move from entry field to entry fieldand the ▲/▼ buttons to change the entries. Where numbersare displayed, you can also enter numbers directly using thenumber keypad on your remote.✎ If you select Everyday or Every Week, the date youselect in the Date field becomes the start date for yourscheduled viewing. For Everyday, the TV will turn onevery day, at the time you selected, starting from thatdate. For Everyweek, the TV will turn on every week,on the same day of the week as the start date youselected, at the time you selected, from that day on. Ifyou select Once, the TV will turn on once, on the dateand time you selected.5. Press the ENTERE button on your remote when done.✎ Only Added Channels can be scheduled.✎ Scheduled programs and channels are displayed in theProgrammed List.✎ When you select a digital channel, press the ► button toview the digital program list. If you highlight a program inthe list, and then press the ENTERE(Schedule) button,you set Timer Viewing for that program directly.■ Select All: Select all the channels in the displayed channel list.■ Deselect All: Deselect all the selected displayed channels.✎ You can only select Deselect All when one or morechannels are selected.■ Channel Name Edit: Analog channels only. Lets you assign aname of up to five characters to an analog channel. For example,Hist, Food, Golf, etc. This makes it easier to find and select achannel .■ Auto Program: See Auto Program under Memorizing Channels.Programmed List (on the Channel List Screen)The Programmed list displays the channels and programs youhave scheduled for viewing using the Time Viewing function. Youcan view, modify, or delete a show you have scheduled using thefunctions on the Programmed List screen Tools menu.Programmed List Screen Tools Menu t■ Change Info: Change the scheduling information for a show orchannel you have scheduled.To change the information, follow these steps:1. Select the Programmed List icon on the left side of theChannel List screen, and then press the ENTERE button.2. On the Programmed List screen, select the show or channelentry you want to change, and then press the TOOLS button.The Tools Menu appears.3. Select Change Info, and then press the ENTERE button.The Time Viewing screen appears.4. Use the ◄/► buttons to move from entry field to entry fieldand the ▲/▼ buttons to change the entries. Where numbersare displayed, you can also enter numbers directly using thenumber keypad on your remote.5. Press the ENTERE button when done.■ Cancel Schedules: Cancel a show or channel you havescheduled.To cancel a scheduled show or channel, follow these steps:1. Select the Programmed List icon on the left side of theChannel List screen, and then press the ENTERE button.2. On the Programmed List screen, select the show or channelentry you want to cancel, and then press the TOOLS button.The Tools Menu appears.3. Select Cancel Schedules, and then press the ENTEREbutton. The Cancel Schedule screen appears.4. Select OK, and then press the ENTERE button.■ Information: Display the information for a show or channel youhave scheduled. You can also change the schedule Information.1. Select the Programmed List icon on the left side of theChannel List screen, and then press the ENTERE button.2. On the Programmed List screen, select the show or channelentry you want information for, and then press the TOOLSbutton. The Tools Menu appears.3. Select Information, and then press the ENTERE button.The Time Viewing Information screen appears.4. Select Change Info and press the ENTERE buttonto change information, or select Close and press theENTERE button to close the Information screen.■ Select All / Deselect All: You can select or deselect allchannels in the channel list.❑ Other Channel Menu FunctionsChannel Mode (Added Channels/FavoriteChannels)Lets you select the channel list displayed when you press the<CH> (Channel) button on your remote. For example, if youselect Favorite Channels, you will only see Favorite channels whenyou press the <CH> button.Fine TuneAnalog channels only.If the reception is clear, you do not have to fine tune the channel,as this is done automatically during the search and storeoperation. If the signal is weak or distorted, fine tune the channelmanually.✎ Select the channel, and then select Fine Tune.✎ Fine tuned channels that have been saved are marked withan asterisk “*” on the right-hand side of the channel numberin the channel banner.✎To reset fine-tuning, select the channel, select Fine Tune, andthen select Reset on the Fine Tune screen.Setup MenuPlug & PlayLets you re-run the Plug & Play initial setup procedure. Forinstructions, see your Quick Start Guide.LanguageSet the menu language.✎ Choose between English, Español, and Français.❑ Setting the TimeTime✎ The time you set will appear when you press the INFObutton.■ Clock: Set the clock so you can use the various timer featuresof the TV.✎ If you disconnect the power cord, you have to set theclock again.To set the clock, follow these steps:1. Select Setup >Time > Clock.2. Press ENTERE and select Auto or Manual, and then pressENTERE again.If you selected Auto:The TV will automatically download the correct time from adigital channel.• Select Time Zone, and then press the ENTERE button.Use the▲/▼ buttons to select your Time Zone, and thenpress ENTERE.• Select DST (Daylight Savings Time), and then pressENTERE. Select On if you want to turn the DSTadjustment on and off manually. Select Off to turn off theDST adjustment. Select Auto if you want the TV to adjustto DST automatically. Press ENTERE when done.✎ DST and Time Zone function are only available whenthe Clock Mode is set to Auto.If you selected Manual:The Clock Set screen appears. Use the ▲/▼ buttons tochange the values in each field or use the number buttons toenter the values directly. Use the ◄/► buttons to move fromfield to field. When done with all the fields, press ENTERE.✎ Available only when Clock Mode is set to Manual.■ Sleep Timer tAutomatically shuts off the TV after a preset period of time. (30,60, 90, 120, 150 and 180 minutes).✎ To cancel the Sleep Timer, select Off.Timer 1 / Timer 2 / Timer 3Turns the TV on and off automatically at times and days youselect. You can set three different on/off timer settings.✎ You must set the clock first.■ On Time / Off Time: Set the hour, minute, am/pm, andActivate/Inactivate fields for the On Time and Off Time. Use the◄/► buttons to move from field to field. Use the ▲/▼ buttonsto change the values in each field. To activate the timer withthe setting you have chosen, set the Activate/Inactivate field toActivate.■ Volume: Set the desired loudness.■ Contents: To select what will be turned on when the timersetting is activated. You can set the TV to turn on a specificchannel or play back contents such as photo or audio files.Use the ◄/► buttons to move to move to the Contents field,and then press the ENTERE button. The Contents screenappears. Use the ◄/► buttons to move from field to field. Usethe ▲/▼ buttons to change the values in each field.- TV/USB: Select TV or USB. The USB device must beconnected to your TV before you can select USB.- Antenna: Displays the current antenna source, Air or Cable.- Channel: If you have selected TV, select the desired channel.- Music/Photo: If you have selected USB, follow these steps toselect a folder containing MP3 (Music) or JPEG (Photo) files onthe USB device:✎ The maximum displayed number of files, including subfolders, in one folder of USB storage device is 2000.✎ The media may not be playing smoothly when using thedevice lower than USB 2.0.1. Use the ◄/► buttons to move to the field under Musicor the field under Photo, and then press the ENTEREbutton. The TV displays a single folder (the Root folder)and the type or name of the device.The On Screen MenusYour TV has two kinds of menus, the Main menu and the variousTools menus. The Main menu gives you access to most or all ofthe menu options available on your TV. The Tools menus displaya selected number of frequently used menu options that changedepending on the screen you are viewing. A Tools menu symbol(T) in the lower right side of the screen indicates that a Tools menuis available.The Main menu has seven primary categories:y Picture y Inputy Sound y Applicationy Channel y Supporty SetupTo view the Main menu, press the MENU button on your remote. Toview a Tools menu, press the TOOLS button on your remote.✎ The menu options that appear in the Main menu dependon the Source you have selected. For example, if you haveselected the HDMI source, the Channel category will notappear. To see the Channel category, you must first select TVin the Source List.The Menu options are presented below, arranged by Main menucategories. A Tools button symbol (t) next to an optionname indicates the option is also available in one of the Toolsmenus.Picture MenuMode tSelect your preferred picture mode.✎ When your TV is connected to a PC, you can only selectEntertain and Standard.■ Dynamic: Brightens the screen. Suitable for a bright room.■ Standard: Suitable for a normal.■ Movie: Darkens the screen, making it less glary. Suitable forwatching movies in a darkened room.■ Entertain: Sharpens the picture. Suitable for games.✎ Only available when the TV is connected to a PC.Backlight / Contrast / Brightness / Sharpness /Color / Tint (G/R)■ Backlight: Adjusts the brightness of the screen by adjusting thebrightness of the individual pixels.■ Contrast: Increases or decreases the contrast between dark andlight areas of the picture.■ Brightness: Adjusts the brightness of the screen. Not aseffective as Backlight.■ Sharpness: Sharpens or dulls the edges of objects.■ Color: Adjusts the color saturation. The higher the Color setting,the more intense the color. Low settings remove color and thepicture becomes black, white and gray.■ Tint: Adjusts the amount of green and red in the picture. As youincrease the amount of green, the amount of red decreases andvice versa.✎ When the TV is connected to a PC, you can only makechanges to Backlight, Contrast, Brightness, andSharpness.Advanced SettingsAvailable in Standard and Movie mode only.Compared to previous models, new Samsung TVs offer a moreprecise picture with more precise controls.✎ When your TV is connected to a PC, you can only makechanges to Gamma and White Balance.■ Color Space (Auto / Native): Auto automatically matches therange of colors available to create pictures to the color range ofthe video source. Native provides a color range wider than thecolor range of the video source.■ White Balance: Adjusts the color temperature of the picture sothat white objects look white (instead of, for example, slightlypink or slightly yellow) and the overall color of the picture looksnatural.R-Offset / G-Offset / B-Offset: Adjusts each color’s (red,green, blue) darkness.R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green,blue) brightness.Reset: Resets the White Balance to it’s default settings.■ Gamma: Adjusts the primary color intensity.■ Dynamic Contrast (Off / Low / Medium / High): Adjusts thescreen contrast.■ Black Tone (Off / Dark / Darker / Darkest): Selects the blacklevel to adjust the screen depth. Darker settings make blackslook darker.■ Flesh Tone: Adjusts the amount of red in skin tones.■ Motion Lighting (Off / On): When on, the TV automaticallyadjusts the brightness of the screen in response to thebrightness of the room. In bright light, the screen brightens. Indim light, the screen dims.✎ Available in Standard mode only.Picture Options✎ When the TV is connected to a PC, you can only makechanges to the Color Tone, Size and HDMI Black Level.■ Color Tone (Cool / Standard / Warm1 / Warm2): Cool makesthe picture bluer (cooler). Warm 1 and Warm 2 make the pictureredder (warmer).✎ Warm1 and Warm2 are deactivated when the picturemode is set to Dynamic.■ Size: Set the size and aspect ratio of the picture on the screen.Your cable box or satellite receiver may have its own set ofscreen sizes as well. However, we highly recommend you usethe TVs 16:9 mode most of the time.16:9: Sets the picture to the 16:9 wide screen format.Zoom1: Provides moderate magnification of the picture. Sides,top, and bottom are cut off.Zoom2: Provides larger magnification of the picture. Sides, top,and bottom are cut off.Wide Fit: Enlarges the aspect ratio of the picture so the picturefits the entire screen.4:3: Sets the picture to the old, 4:3 format and puts black or grayborders on the right and left of the picture.✎ Do not watch your TV in the 4:3 format for a long time.Traces of borders displayed on the left, right and center ofthe screen may cause image retention (screen burn) whichis not covered by the warranty.Screen Fit: Displays the full image without any cut-off whenyour TV is inputting HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) HD signals.✎ HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p(1920x1080) or 720p (1280x720) resolution.✎ You can adjust and store settings for each external device youhave connected to an input on the TV. Picture Sizes availableby Input Source are listed below:2. Press the ENTERE button. A list of folders on the deviceappears.✎ If there are no folders on your device, press theYellow select button to select the Root folder, andthen press the RETURN button. The Timer screenre-appears.3. Use the ▲/▼ buttons to highlight a folder that containsmusic or photos, and then press the Yellow select buttonto select the folder.4. Press the RETURN button. The Timer screen re-appears.■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sunor Manual. If you select Manual, you can select the days youwant to activate the timer by using the ◄/► buttons to highlightthe day, and then pressing the ENTERE button. To unselect aday, highlight it, and then press the ENTERE button.When you finished making all your selections on the Timer screen,press either the ENTERE or RETURN button.❑ Other FeaturesProgram Rating LockThe Program Rating Lock feature lets you block programsyou've determined are inappropriate for your children based onthe program's ratings. To access the Program Rating Lockfeature and make any changes, you must enter a PIN (personalidentification number). To watch a blocked program, you must alsoenter the same PIN.✎ Program Rating Lock is not available in HDMI orComponent mode.✎ The default PIN number of a new TV set is “0-0-0-0”. You canset your own PIN using the Change PIN function.How It WorksWhen you access the Program Rating Lock Menu functions forthe first time, the PIN input screen appears. Enter 0-0-0-0. The PINscreen closes and the Program Rating Lock Menu appears. Everytime you access the Program Rating Lock functions, the PINscreen will appear and you must enter a PIN.When the Rating Lock screen appears, select Program RatingLock, and then press ENTERE. Select On, and then press theENTERE key again. Depending on what type of programs ormovies you want to block, select one of the options on the screen,and then press the ENTERE button. The options are listed below:■ TV Parental Guidelines: You can block TV programs basedon their ratings. This function allows you to control what yourchildren are watching.■ MPAA Rating: You can block movies based on their MPAAratings. The Motion Picture Association of America (MPAA) hasimplemented a rating system that provides parents or guardianswith advanced information on which films are appropriate forchildren.■ Canadian English: You can block TV programs based on theirAnglophone Canadian ratings.■ Canadian French: You can block TV programs based on theirFrench Canadian ratings.■ Downloadable U.S. Rating: Parental restriction information canbe used while watching DTV channels.Locking/Blocking Programs or MoviesYou lock or block programs and/or movies in essentially the sameway for each option. Each option displays a grid or table. All thetables have ratings listed on the left. The TV Parental Guidelinesoption also has kinds of content listed across the top: ALL: Lock allTV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation/ L: Adult Language / D: Sexually Suggestive Dialog.To lock/block movies or shows with certain ratings and/or kinds ofcontent, click the square next to the rating and/or under the kind ofcontent. A lock appears. To unlock/unblock, click the square again.When you click a low rating, all the ratings above it will also displaylocks. You can also Allow All or Lock All. When done, press theRETURN button on your remote.■ Change PIN: The Change PIN screen will appear. Choose any4 digits for your PIN and enter them in Enter New PIN fields.Re-enter the same 4 digits in Confirm New PIN fields. When theChange PIN screen disappears, press the OK button. The TVhas memorized your new PIN.✎ If you forget the PIN, press the remote-control buttons inthe following sequence, which resets the pin to “0-0-0-0” :POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)Game Mode (On/Off)When you connect a game console such as a PlayStation™or Xbox™ to your TV, you can enjoy a more realistic gamingexperience by turning on the Game Mode function.✎ Precautions and limitations for game mode:x Before you disconnect the game console and connect anotherexternal device, set Game Mode to Off in the setup menu.x If you display the TV menu in Game Mode, the screen shakesslightly.✎ Game Mode is not available when the input source is set toTV.✎ After connecting the game console, set Game Mode to On.You may notice slightly reduced picture quality.Caption(On-Screen Text Dialogue)■ Caption: You can switch the caption function on or off. Ifcaptions are not available, they will not be displayed on thescreen.✎ The Caption feature does not work in Component orHDMI mode.■ Caption Mode: You can select the desired caption mode.Default / CC1~CC4 / Text1~Text4: (analog channels only) TheAnalog Caption function operates in either analog TV channelmode or when a signal is supplied from an external device to theTV. (Depending on the broadcasting signal, the Analog Captionfunction may or may not work with digital channels.)Default / Service1~Service6 / CC1~CC4 / Text1~Text4:(Digital channels only) The Digital Captions function works withdigital channels.✎ Service1~6 may not be available in digital caption modedepending on the broadcast.■ Digital Caption Options: (Digital channels only)Size: Options include Default, Small, Standard and Large. Thedefault is Standard.Font Style: Options include Default and Styles 0 to 7. Thedefault is Style 0.Foreground Color: Options include Default, White, Black, Red,Green, Blue, Yellow, Magenta and Cyan. You can change thecolor of the letters. The default is White.Figures and illustrations in this User Manual are provided for referenceonly and may differ from actual product appearance. Product design andspecifications may be changed without notice.Important Warranty Information RegardingTelevision Format Viewing✎ See the warranty card for more information on warrantyterms.Wide screen format LED Displays (16:9, the aspect ratio of thescreen width to height) are primarily designed to view wide screenformat full-motion video. The images displayed on them shouldprimarily be in the wide screen 16:9 ratio format, or expanded tofill the screen if your model offers this feature and the images areconstantly moving. Displaying stationary graphics and images onscreen, such as the dark sidebars on non- expanded standardformat television video and programming, should be limited to nomore than 5% of the total television viewing per week. Additionally,viewing other stationary images and text such as stock marketreports, video game displays, station logos, web sites or computergraphics and patterns, should be limited as described above forall televisions. Displaying stationary images that exceed the aboveguidelines can cause uneven aging of LED Displays that leavesubtle, but permanent burned-in ghost images in the LED picture.To avoid this, vary the programming and images, and primarilydisplay full screen moving images, not stationary patterns or darkbars. On LED models that offer picture sizing features, use thesecontrols to view different formats as a full screen picture. Be carefulin the selection and duration of television formats you use forviewing. Uneven LED aging as a result of format selection and use,as well as burned-in images, are not covered by your Samsunglimited warranty.• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITEDWARRANTY STATEMENTSubject to the requirements, conditions, exclusions and limitationsof the original Limited Warranty supplied with Samsung Electronics(SAMSUNG) products, and the requirements, conditions, exclusionsand limitations contained herein, SAMSUNG will additionallyprovide Warranty Repair Service in the United States on SAMSUNGproducts purchased in Canada, and in Canada on SAMSUNGproducts purchased in the United States, for the warranty periodoriginally specified, and to the Original Purchaser only.The above described warranty repairs must be performed by aSAMSUNG Authorized Service Center. Along with this Statement,the Original Limited Warranty Statement and a dated Bill of Saleas Proof of Purchase must be presented to the Service Center.Transportation to and from the Service Center is the responsibility ofthe purchaser. Conditions covered are limited only to manufacturingdefects in material or workmanship, and only those encounteredin normal use of the product. Excluded, but not limited to, areany originally specified provisions for, in-home or on-site services,minimum or maximum repair times, exchanges or replacements,accessories, options, upgrades, or consumables.For the location of a SAMSUNG Authorized Service Center, pleasecall toll-free:–– In the United States : 1-800-SAMSUNG (1-800-726-7864)–– In Canada : 1-800-SAMSUNGStill image warningAvoid displaying still images (such as jpeg picture files) or stillimage elements (such as TV channel logos, TV shows or moviesin panorama or 4:3 format, stock or news scroll bars, etc.) on thescreen. The constant display of still pictures can cause ghosting orimage burn-in (image retention) on the LED screen, which will affectimage quality. To reduce the risk of this effect, please follow therecommendations below:• Avoid displaying the same TV channel for long periods.• Always try to display any image in full screen mode. Use the TV'sPicture Options menu to select the optimal screen size.• Reduce brightness and contrast values to the minimum requiredto achieve the desired picture quality. Values that exceed theminimum may speed up the burn-in process.• Frequently use all TV features designed to reduce image retentionand screen burn-in. Refer to proper user manual section fordetails.LED TVuser manual© 2012 Samsung Electronics Co., Ltd. All rights reserved.Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products,please contact the SAMSUNG customer care center.Country CANADA U.S.A.AddressSamsung ElectronicsCanada Inc., CustomerService 55 Standish CourtMississauga, Ontario L5R4B2 CanadaSamsung ElectronicsAmerica, Inc.85 Challenger RoadRidgefield Park, NJ 07660Customer Care Center  1-800-SAMSUNG(726-7864)Web Sitewww.samsung.com/ca(English)www.samsung.com/ca_fr(French)www.samsung.com- 2 -- 1 -- 6 -- 5 -- 3 -- 7 -- 4 -- 8 -BN68-04674ABN68-04674A-00Input Source Picture SizeATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2,4:3DTV (1080i, 1080p), Component (1080i,1080p), HDMI (720p, 1080i, 1080p)16:9, Wide Fit, 4:3,Screen Fit■ Digital Noise Filter (Off / Low / Medium / High / Auto) : If thebroadcast signal received by your TV is weak, you can activatethe Digital Noise Filter feature to reduce any static and ghostingthat may appear on the screen.✎ When the signal is weak, try all the Digital Noise Filteroptions until the TV displays the best picture.■ HDMI Black Level (Normal / Low) : For HDMI signals, selectthe black level to adjust the screen depth. Low make blacks lookdarker.✎ Available only in HDMI mode (RGB signals).■ Film Mode (Off / Auto) : Sets the TV to automatically sense andprocess film signals from all sources and adjusts the picture foroptimum quality.✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i /1080i) and HDMI (480i / 1080i).■ Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /Demo): Enhances motion in fast moving scenes.✎ The info screen on your TV displays the resolution andfrequency of the incoming video signal (60Hz). Thisdisplayed frequency is not what the TV is displaying byusing the Auto Motion Plus function.■ LED Motion Plus (Off / On): Removes drag from fast sceneswith a lot of movement to provide a clear picture.Picture Reset■ Picture Reset (Reset Picture Mode/Cancel): Resets thepicture settings to their factory defaults.Sound MenuMode t■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency sounds to allowa better listening experience for the hearing impaired.EqualizerAvailable in Standard sound mode only.■ Balance L/R: Adjusts the balance between the right and leftspeaker.■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (BandwidthAdjustment): Adjusts the loudness of specific bandwidthfrequencies.■ Reset: Resets the equalizer to its default settings.SRS TruSurround HDAvailable in Standard sound mode only.SRS TruSurround HD is a patented SRS technology that solvesthe problem of playing 5.1 multichannel content through twospeakers. TruSurround delivers a compelling, virtual surroundsound experience through any two-speaker playback system,including internal television speakers. It is fully compatible with allmultichannel formats.Preferred LanguageDigital channels only.Digital-TV broadcasts can transmit many audio trackssimultaneously (for example, simultaneous translations of a programinto foreign languages).✎ You can only select a language from among the ones beingbroadcast.Multi-Track Sound (MTS)Analog channels only.■ Mono: Select for channels that are broadcasting in mono or ifyou are having difficulty receiving a stereo signal.■ Stereo: Select for channels that are broadcasting in stereo.■ SAP: Select to listen to the Separate Audio Program, which isusually a foreign-language translation.✎ Depending on the program being broadcast, you can listen toMono, Stereo or SAP.Auto VolumeBecause each station has its own broadcasting conditions, thevolume may fluctuate each time you change the channel. Thisfeature automatically adjusts the volume of a channel by loweringthe sound output when the modulation signal is high or by raisingthe sound output when the modulation signal is low.Sound Reset■ Reset All: Resets all sound settings to the factory defaults.Channel Menu❑ Memorizing ChannelsWhen you first set up your TV using Plug & Play, the TVmemorized the channels that were available over the air or throughyour cable system and added them to the Channel List. TheAntenna and Auto program functions described below let youre-run the channel memorization function without having to re-runthe Plug & Play procedure.Antenna (Air / Cable) tBefore your television can memorize the available channels, youmust select your TV's signal source, Air (using an antenna) orCable. Select Menu >Channel > Antenna > Air or Cable. Afteryou have selected the signal source, go on to the Auto Programfunction.✎ Selecting the signal source using the Antenna function alsodetermines the signal source the TV is tuned to. For example,if you receive your TV signal over the air, and you selectCable, you will see only snow. You must select Air to see apicture.Background Color: Options include Default, White, Black, Red,Green, Blue, Yellow, Magenta and Cyan. You can change thebackground color of the captions. The default is Black.Foreground Opacity: This adjusts the opacity of text. Optionsinclude Default, Transparent, Translucent, Solid and Flashing.Background Opacity: This adjusts the opacity of the captionbackground. Options include Default, Transparent, Translucent,Solid and Flashing.Return to Default: This option sets each Size, Font Style,Foreground Color, Background Color, Foreground Opacity andBackground Opacity to its default.✎ Digital Caption Options are available only when you canselect Default and Service1 ~ Service6 in Caption Mode.✎ The Foreground and Background cannot be set to thesame color.MelodyLets you control whether a melody plays when the TV is turned onor off.✎ The Melody does not play:x When no sound is output from the TV because the MUTEbutton has been pressed.x When no sound is output from the TV because the volumehas been reduced to minimum with the VOL – button.x When the TV is turned off by the Sleep Timer function.Auto Protection Time■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10hours): If the screen remains idle with a still image for a certainperiod of time you define, the screen saver is activated to preventthe formation of ghost images on the screen.Eco Solution■ Energy Saving (Off / Low / Medium / High / Picture Off) :This adjust the brightness of the TV in order to reduce powerconsumption. If you select Picture Off, the screen is turnedoff, but the sound remains on. Press any button except volumebutton to turn on the screen.■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Setshow quickly the TV switches to standby mode, if no picture isbeing received.✎ Disabled when the PC is in power saving mode.■ Auto Power Off (Off / On): The TV will be automatically turnedoff when no user operation is received for 4 hours.Support MenuSelf Diagnosis■ Picture Test: Use to check for picture problems. If the problemappears in the test picture, select Yes and follow the directionson the screen.■ Sound Test: Use the built-in melody sound to check for soundproblems. If the problem occurs during the test, select Yes andfollow the directions on the screen.■ Signal Strength: (Digital channels only) An HD channel’sreception quality is either perfect or the channels are unavailable.Adjust your antenna to increase signal strength.■ Reset: Reset all settings to the factory defaults.✎ The PIN input screen appears before the setup screen.✎ Enter your 4-digit PIN. Change the PIN using the ChangePIN option.Software UpgradeSoftware Upgrade can be performed by downloading the latestfirmware from samsung.com to a USB memory device.HD Connection GuideRefer to this information when connecting external devices to theTV.Contact SamsungView this information when your TV does not work properly orwhen you want to upgrade the software. You can find informationregarding our call centers and how to download products andsoftware.Media PlayEnjoy photos, music and/or movie files saved on aUSB Mass Storage Class (MSC) device.PPOWERMEDIA.P❑ Connecting a USB Device1. Turn on your TV.2. Connect a USB device containing photo, music, and/or moviefiles to the USB jack on the back of the TV. A pop up windowappears.3. Press the MEDIA.P button on your remote. The Media Playmenu appears.❑ Using the Media Play MenuSUM ■ Change Device E Enter R ReturnMedia PlayVideosTo open Media Play in the Menu, follow these steps:1. Press the MENU button. Then, press the ▲ or ▼ button toselect Application on the left, and then press the ENTEREbutton.2. Press the ▲ or ▼ button to select Media Play (USB), and thenpress the ENTERE button.3. Press the ◄ or ► button to select an icon (Videos, Music,Photos, Settings), and then press the ENTERE button.✎ Media Play might not work properly with unlicensedmultimedia files.✎ Need-to-Know List before using Media Play (USB)x The file system supports FAT16, FAT32 and NTFS.x Certain types of USB Digital camera and audio devices may notbe compatible with this TV.x Media Play only supports USB Mass Storage Class (MSC)devices. MSC is a Mass Storage Class Bulk-Only Transportdevice. Examples of MSC are Thumb drives and Flash CardReaders. Devices should be connected directly to the TV’s USBport. USB HDD is not supported.[UEH6003-ZA]BN68-04674A-ENG.indd 1 2012-08-17 �� 4:57:32

/ 2

Related manuals for Samsung UN60EH6003