BN68-05448A-01QUICK STARTGUIDEWelcome to your new Smart TV!The following instructions cover assembling, connecting, and setting up your new TV. Makesure you have the accessories listed below.Included in this boxRemote Control Stand Parts and Cablesx 4Power Cord Wall mount adapterRemote Control IR extenderBatteries (AAA x 2)Also included: User ManualStep 1Attach the TV tothe StandStep 2Connect videodevicesStep 3Insert thebatteries into theremote controlStep 4Power on andstart the initialsetupWarning: Screens can be damagedfrom direct pressure when handledincorrectly. We recommend lifting theTV by the edges, as shown.Step 1 Installing the Wall Mount (Optional)Wall or Ceiling Mounting:If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the productmay slide or fall, causing serious injury to a child or adult, and serious damage to the product.1A 1BLoosen four screws on the back of the TV.Make sure that at least two people are holding each side of the TVbefore removing the stand as shown in the illustration.1CMake sure that the remote control sensor doesnot touch the bottom when detaching the stand,to mount the TV on a wall.After detaching the stand from the TV, re-insert the screws into the stand to block the screw holes and storethe screws.