Samsung Ubigate iBG2016 Troubleshooting Manual

Also see for Ubigate iBG2016: Configuration guide

Contents

TroubleShooting Manual2 © SAMSUNG Electronics Co., Ltd.Troubleshooting1. Change threshold alarm max-call value.2. Change system-wide max-call count.(default max-call count isconfigured to system maximum value)To change theshold alarm max-call value, use call-admission threshold alarmmax-call CLI command in global configuration command mode. To checkcurrent value use show running-config command.call-admission threshold alarm max-call min maj no call-admission threshold alarm max-callmin : Is the percentage of current call count against max call countthat minor alarm would be created. Default value is 70. Range is 1~99.maj : Is the percentage of current call count against max call countthat major alarm would be created. Default value is 80. Range is 1~99.To change max call used as the basis, use ‘call-admission max-calls’ commandin global configuration command mode. To check current value use showrunning-config command.call-admission max-calls value: Designates max calls that is admitted and a number of 1~20,000 can beused.