Samsung VP-D20 Service Manual

Also see for VP-D20: Service manual Owner's instruction book Owner's instruction manual Owner's instruction manual Manual

Contents

Alignment and AdjustmentsSamsung Electronics2-43) Zoom VR CenterŒ Connect a video output terminal to a TV.´ Press the “EASY”(Mode Up)/”DISPLAY”(Mode Down) buttons so that OSD shows “OD6 XX XX”.ˇ Press the “ENTER” (Confirm).¨ Then Micom finds out Zoom VR center position.Store Zoom VR center value in OB7.4) Auto HALLŒ Connect a video output terminal to a TV.´ Press the “EASY”(Mode Up)/”DISPLAY”(Mode Down) buttons so that OSD shows "OCD XX XX".ˇ Press the “ENTER” (Confirm).¨ Then micom finds out max. Hall value with an iris opened and min. Hall value with an iris closed.Store max. and min. value of Hall in OAD and OAC respectively.ˆ The OSD shows “OK” after finishing the adjustment.5) Auto IRIS LevelŒ Connect a video output terminal to a wave form monitor and a TV.´ Press the “EASY”(Mode Up)/”DISPLAY”(Mode Down) buttons so that OSD shows "OCE XX XX".ˇ Press the “ENTER” (Confirm).¨ Then micom finds out max. Hall value with an iris opened and min.Hall value with an iris closed. Store max. and min. value of in OBC, OBD and OBB respectively.ˆ The OSD shows “OK” after finishing the adjustment.6) Auto White Balance (indoor)Œ Camera mode & 3100˚ K/5100˚ K gray scale chart.´ Connect a video output terminal to a vectorscope and a TV.ˇ Press the “EASY”(Mode Up)/”DISPLAY”(Mode Down) buttons so that OSD shows "OD4 XX XX".¨ Ensure that camera picks up image 40μs on 3100˚K gray scale chart precisely and the illumination is 1500~2000Lux.ˆ Press the “ENTER” (Confirm) to ensure that white spot on a vectorscope is moving in the middle of screen.Ø The OSD shows “OK” after finishing the adjustment.7) Auto White Balance (outdoor)Œ Camera mode & 3100˚ K/5100˚ K gray scale chart.´ Connect a video output terminal to a vectorscope and a TV.ˇ Press the “EASY”(Mode Up)/”DISPLAY”(Mode Down) buttons so that OSD shows "OD5 XX XX".¨ Ensure that camera picks up image 40 μs on 5100 gray scale chart (3100 gray scale chart + C16 filter) preciselyand the illumination is 1500~2000 Lux.ˆ Press the “ENTER” (Confirm) to ensure that white spot on a vectorscope is moving in the middle of screen.Ø The OSD shows “OK” after finishing the adjustment.