Samsung VP-D20 Service Manual

Also see for VP-D20: Service manual Owner's instruction book Owner's instruction manual Owner's instruction manual Manual

Contents

Alignment and AdjustmentsSamsung Electronics 3-1Note : For LCD adjustment, use the buttons on the video camera and the SET key.After each adjustment step is completed, OSD shows "OK".EEPROM(ICL202) stores confirmed adjustment value of each adjustment step.After finishing the adjustment, turn power off.3-1 How to get into the LCD adjust modeSTEP 1Œ Connect the power source (battery/DC cable).´ Set the power switch to "REC" position.ˇ Set the Lens to CAMCORDER.¨ Camera screen and OSD appears.ˆ Open housing of the video camera and remove tape.Ø Open the LCD.STEP 2Œ Press and hold the "STOP" and "EASY" buttons on the video camera at the same time for more than 5 seconds.´ When monitor OSD appears as shown Fig. 3-2, the adjustment mode has been activated successfully.ˇ Move the “MENU Dial” to highlight LCD/CVF ADJ and push the “ENTER”.¨ When changing the adjustment item, please press the “EASY”/”DISPLAY” buttons on the camera.ˆ You can change the adjustment value to move the “MENU Dial” Up or Down.Ø After setting adjustment value, please push the “ENTER” to confirm Data.Fig. 3-1V.LIGHTDISPLAYPBZOOMEASY ButtonDISPLAY ButtonSTOP ButtonMENU DialENTER Button3-2 Function of each buttons on the SET KeyButtons DescriptionENTER push (Confirm) Stores changed value in the adjustment and auto adjustment mode.EASY (Mode Up) Shift adjustment address to left.DISPLAY (Mode Down) Shift adjustment address to right.MENU Dial up (Data Up) Up value.MENU Dial down (Data Down) Down value.Note : In service adjustment mode, button names are different from those in customer function control mode.Fig. 3-2ADJ ITEMVCR ADJCAM ADJCODEC ADJPRML ADJCAM DISPDSC ADJLCD/CVF ADJ3. LCD Adjustment