troubleshooting _21Motor speed sensor problem. Restart the cycle.If the code reappears, call for service.Temperature sensor problem. Restart the cycle.If the code reappears, call for service.High current detected. Restart the cycle.If the code reappears, call for service.High/Low voltage detected. Restart the cycle.If the code reappears, call for service.Too many suds are detectedduring the washing session.The unit is put on hold until thesuds are reduced. Then, the unitwill go back to the operation.When it finishes washing, End andSd codes will blink in turn.To prevent it, cut down on detergents.For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)05 troubleshootingWF218ANB-02440B-04_EN.indd 21 2009-03-06 ¿ÀÈÄ 4:14:01
