Samsung WF361BVBEWR/A1-0001 User Manual

Also see for WF361 Series: User manual User manual User manual User manual Technical information

Contents

setting LADVoLArwasherINSTALLING YOUR WASHERBefore STEP 5 is complete, do not plug the power cord into a wall socket.CAUTIONZ_ Packaging materials can be dangerous to children; keep all packaging material (plastic bags,....... polystyrene, etc.) well out of the reach of children.Installation flow chartSelecting a _ Removing the shipping _ Connecting thewaterlocation bolts (*Drum only) and the drainPlease Adjusting the _ powedng your washingcheck again levelling feet machinebeforeste[. Doesyour washerhaveexcessvibrationYes or noise?Finish theinstallationNoSTEP 1Selecting a location_ Before you install the washer, make sure the location:• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.Has no dust, oil, detergent etc.Is away from direct sunlight.Has adequate ventilation.Will not have temperatures at or below 32 °F or 0 °C.Is away from heat sources such as oil or gas.• Has enough space so that the washer doesn't stand on its power cord.STEP 2Removing the Shipping BoltsBefore using your washer, you must remove all shippingbolts from the back of the unit.t. Loosen all the bolts with the supplied wrench.2. Slide the bolt and spacer up and remove the bolt withthe spacer through the hole in the rear wall of yourwasher. Repeat for each bolt.3. Fill the holes with the supplied plastic covers.4. Keep the shipping bolts and spacers for future use.16 setting up your washerWF361 363 365-02832J-02 £N.indd Sec5:16 2012-07-24 C-8:08:41 I