Samsung Wi-Fi Kit MIM-H03U User & Installation Manual

Also see for MIM-H03U: User & installation manual

15ENGLISHStarting SmartThings appTo use the SmartThings app, connect the product to the network in the sequence described below.The images shown may differ depending on your smartphone model, OS version and manufacturer.You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product isconnected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks.Checking the power connectionsCheck if the power is connected to the product and the access point.Setting up and connecting to a Wi-Fi access point using your smartphone1. To connect the product to a Wi-Fi network, turn on Wi-Fi at “Settings > Wi-Fi”, and then select the access point to connecttof Only alphanumeric characters are supported for wireless access point names (SSIDs).If an SSID has a special character, rename it before connecting to it.f This product supports only Wi-Fi 2.4 GHz.SAMSUNG_2GSAMSUNG_5G2. Turning off “SMART NETWORK SWITCH” at “Settings > Wi-Fi” on your Smartphonef If “SMART NETWORK SWITCH” or “Adaptive Wi-Fi” is turned on, you cannot connect to the network. Be sure to turn offthese functions before connecting to the network.• The setup may differ depending on your smartphone model, OS version and manufacturer.3. Checking the Internet connectivityf After connecting to Wi-Fi, check that your smartphone is connected to the Internet.• A firewall may prevent your smartphone from connecting to the Internet. In this case, contact your Internet serviceprovider for troubleshooting.NOTENOTE