GBWin-1Setting the ClockYour system is equipped with a clock which allows you to turnyour system on and off automatically. You should set the clock:When you purchase the audio systemAfter a power failureAfter unplugging the unitRemember to reset the time when the clock changes fromwinter to summer time and vice versa.For each step, you have a few seconds to set the required options.If you exceed this time, you must start again.Switch the system on by pressing On/Standby.Press Timer/Clock twice.Result: CLOCK is displayed.Press Prog./Set.Result: The hour flashes.To... Press...Increase the hoursDecrease the hoursWhen the correct hour is displayed, press Prog./Set.Result: The minutes flash.To... Press...Increase the minutesDecrease the minutesWhen the correct time is displayed, press Prog./Set.Result: The clock starts and is displayed, even when the system is instandby mode.You can display the time, even when you are using anotherfunction, by pressing Timer/Clock once.1234567