Win-7 SAMSUNG AUDIOGBRecording CD tracks to MP3 PlayerSwitch the system on by pressing On/Standby.Insert a Smart Card toMP3 Player.Connect WINGO toMP3 Player as illustrated.Refer to the previouspage for connecting.Press the Open/Close( ) Button to load the disc.Insert the CD with the label side up.Press the Function Switch of WINGO and set to CD mode.Press the CD Synchro Button of WINGO.Press the CD Synchro Button to start recording CD tracks in WINGOto MP3 Player.If "REC" is marked on MP3 player, record starts.With this unit, you can record CD tracks directly into MP3.Making MP3 files from a other CD tracks1. Select the CD track you want to record in MP3 Player.Refer to page win-32. Press the CD Synchro Button of WINGO.To stop RecordingPress the /Tuning Mode Button during Recording.If Smart Card memory is filled up during CD Synchro, "SMC FULL" is dis-played on Wingo Display and CD recording is no longer in the process.In this case, delete music file before using.If the electricity is cut off by power failure or accident source plug extrac-tion during CD Synchro, or MP3 player is pulled out of Wingo body withoutrecording stopped, the music file stored in Smart Card may be damaged. Inthis case, be sure to format Smart Card and re-record it.When to delete files1. Select the MP3 track in MP3 Player unit.2. Press the Delete Button for over 1 second.Result: The following indication appear: These will flicker during00-DEL Deleting00 = Track No.When to delete all files in MP3 PlayerPress to Delete Button for over 5 second, during STOP mode.Result : The following indication appear: These will flicker during Deleting.ALL- DEL(Front) (Back)(Be sure you insert MP3 Player incorrect position.)123456