| 
Installing driver over the network1112. Using a Network-Connected MachineCommand- line Definition Description/s or/SStarts silent installation. Installs machine driverswithout prompting any UIsor user intervention./p”” or/P””Specifies printer port.Network Port willbe created by useof Standard TCP/IPPort monitor. Forlocal port, this portmust exist onsystem beforebeing specified bycommand.Printer port name can bespecified as IP address,hostname, USB local portname, IEEE1284 port name ornetwork path.For example:• /p”xxx.xxx.xxx.xxx” inwhere, “xxx.xxx.xxx.xxx”means IP address fornetwork printer. /p”USB001”, /P”LPT1:”, /p”hostname”• /p"\\computer_name\shared_printer" or"\\xxx.xxx.xxx.xxx\shared_printer" in where,"\\computer_name\shared_printer" or"\\xxx.xxx.xxx.xxx\shared_printer" means thenetwork path to theprinter by entering twoslashes, the computername or local IP address ofthe PC sharing the printer,and then the share nameof the printer./a”” or/A””Specifies destination pathfor installation.The destinationpath should be afully qualifiedpath.Since machine drivers shouldbe installed on the OSspecific location, thiscommand applies to onlyapplication software./n””or/N””Specifies printer name.Printer instance shall becreated as specifiedprinter name.With this parameter, you canadd printer instances as yourwishes./nd or/NDCommands not to set theinstalled driver as a defaultmachine driver.It indicates installed machinedriver will not be the defaultmachine driver on yoursystem if there are one ormore printer driversinstalled. If there is noinstalled machine driver onyour system, then this optionwon’t be applied becauseWindows OS will set installedprinter driver as a defaultmachine driver.Command- line Definition Description |
