116USB DebuggingWhen enabled, allows debugging when the device is attached toa PC by a USB cable.Note: This setting is used for development purposes.1. From a Home screen, touch the Menu Key ➔ Settings➔ Applications ➔ Development.2. Touch USB debugging to enable or disable the setting.When enabled, a check mark appears in the checkbox.Allow Mock LocationsThis setting is used by developers when developing location-based applications.Note: This setting is used for development purposes.1. From a Home screen, touch the Menu Key ➔ Settings➔ Applications ➔ Development.2. Touch Allow mock locations to enable or disable thesetting. When enabled, a check mark appears in thebox.Samsung AppsUsing the Samsung Apps option, the device notifies you whenthere are new applications in Samsung Apps.1. From a Home screen, touch the Menu Key ➔ Settings➔ Applications ➔ Samsung Apps.2. For new application notification, touch On. Touch Off todisable new application notification.3. To delete Samsung Apps’ locale data, touch Reset localeand then touch OK.Accounts and SyncSet up and manage accounts, including your Google and BackupAssistant accounts.General Sync SettingsBackground DataWhen enabled, all accounts can sync, send, and receive data atany time, in the background.Important!: Disabling background data can extend battery life and lower datause. Some applications may still use the background dataconnection, even if this setting is disabled.
