Getting Started 92. Plug the flat end of the Travel Charger into the Charger/Accessory Interface connector on the device (1) and theother end into a standard AC wall outlet.Warning!: While the device is charging, if the touch screen does not functiondue to an unstable power supply, unplug the USB power adapterfrom the power outlet or unplug the USB cable from the device.3. When charging is finished, remove the flat end from theCharger/Accessory Interface connector on the device.Note: Failure to unplug the wall charger before you remove the battery, cancause damage to the device.Turning Your Device On and OffTurning Your Device On Press and hold the Power/Lock Key .Note: Your device’s internal antenna is located along the top back of thedevice. Do not block the antenna; doing so may affect signal qualityand may cause the device to operate at a higher power level than isnecessary.Turning Your Device Off1. Press and hold the Power/Lock Key .2. At the prompt, touch Power off.
