39MeteringIf you cannot obtain suitable exposure conditions, you can change the metering method totake brighter pictures.MULTI( ) : Exposure will be calculated based onan average of the available light in theimage area. However, the calculationwill be biased towards the centre of theimage area. This is suitable for generaluse.SPOT( ) : Only the rectangular area in the centreof the LCD monitor will be metered forlight. This is suitable when the subject in the center is exposed correctly,regardless of the back lighting.The default metering mode is Multi pattern metering.If the subject is not the centre of the focus area, do not use the spot metering as this mayresult in an exposure error. In this circumstance, It is better to use exposurecompensation.INFORMATIONContinuous shotSelect the number of pictures in continuous shooting.- [SINGLE] : Take one picture only- [2, 4, 8 SHOTS] : Take the set number of pictures with onepush of the shutter. Continuous shootingmode is cleared after one shooting.2048 SHOOTINGSINGLE2 SHOTS4 SHOTS8 SHOTSNOR[ PROGRAM mode ]2048 METERINGMULTISPOT2560 NOR11
