Samsung digimax U-CA 501 User Manual

Contents

Samsung digimax U-CA 501 User Manual Manual pdf 76 page image

76Selecting Video out typeThe Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.) to which thecamera is connected. PAL mode can support only BDGHI.Setting the Video Out Type1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [VIDEO] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[VIDEO] sub menu : NTSC, PAL5. Press the menu button twice and the menu will disappear. SETUPSOUNDUSBVIDEONTSCPALBACK : SET : OKP 2560Connecting to an external monitorIn RECORDING/ PLAY mode, you canview the stored still images or movie clipsby connecting the camera to an externalmonitor via the Video cable. When thecamera is connected to an externalmonitor, the LCD monitor will be turnedoff automatically. Yellow color-VideoNTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,Thailand, Norway.When using a TV as an external monitor, you will need to select the external or AVchannel of the TV.There will be a digital noise on the external monitor, but it is not a malfunction.If the image is not in the centre of the screen, use the TV controls to centre it.When the camera is connected to an external monitor, the menu will be visible on the externalmonitor and the menu functions are the same as those indicated on the LCD monitor.When you connect the camera to a display device like TV with video cable, the soundembeded in a still image or a movie clip can't be played back.INFORMATION